Water Methanol Injection Adapters For BMW B58, Audi S4, Q50, Mazda3, & Kia / Hyundai
- Description
- Fitment
- Refund Policy
These plug and play adapters allow you to quickly install a BMS Water/Methanol Injection Kit without drilling/tapping your chargepipe!
Audi S4 Water/Methanol Injection (WMI) Nozzle Adapter
This CNC machined plug and play adapter allows you to mount single or dual BMS Water/Methanol Injection (WMI) nozzles WITHOUT the expense and headache of removing and drilling your factory charge pipe. Shaves a ton of time off the Audi S4 WMI install and best of all is fully reversible. We suggest the BM10 nozzle for most S4 applications. Nozzles not included. Made in the USA.
Plug and play Water/Methanol Injection (WMI) adapter for all B58 BMW motors
Normally you'd replace the factory charge pipe to install a water/methanol kit but in the case of the B58 engine, the factory charge pipe is very sturdy and difficult to remove. So we've designed this plug and play adapter for quick installation and removal of BMS dual nozzle water/meth kits without having to replace the factory charge pipe. Simply unscrew three bolts, insert the CNC machined adapter with integrated o-ring in place, and tighten the included longer length bolts, to allow mounting of two meth nozzles with a perfect seal. Includes dual 1/8" NPT methanol bungs appropriately machined for a clean spray pattern which is critical for proper atomization with the B58 motor. For most B58 water/methanol applications we suggest dual CM5 nozzles.
F / G chassis BMW Vehicle Fitment
(Gen 1 B58 Engines)
Your B58 powered vehicle not listed? Email us a picture of your throttle body.
BMW 1 Series
• 2016-2019 F20 F21 B58 140i including xDrive
BMW 2 Series
• 2016-2019 F22 F23 B58 240i including xDrive
BMW 3 Series
• 2016-2018 F30 F31 F34 B58 340i including xDrive
BMW 4 Series
• 2016-2019 F32 F33 F36 B58 440i including xDrive
BMW 5 Series
• 2017-2019 G30 G31 Gen 1 B58 540i including xDrive
BMW 6 Series
• G32 Gen 1 B58 640 GT
BMW 7 Series
• Gen 1 B58 740i
BMW X Series
• B58 G01 X3 40i (email picture of throttle body before ordering)
• B58 G02 X4 40i (email picture of throttle body before ordering)
G chassis BMW Vehicle Fitment
(Gen 2 B58 Engines)
BMW 2 Series
• 2022+ G42 M240i including xDrive
BMW 3 Series
• 2020-2023 G20 G21 B58 M340i including xDrive
BMW 4 Series
• 2021+ G22 G23 G26 B58 440i including xDrive
BMW 5 Series
• 2020+ G30 G31 Gen 2 B58 540i including xDrive
Toyota Supra Applications
Supra
• 2020+ GR Supra Mk5 3.0L 6 cyl. (B58 Engine)
Gen 1 B58
(1) Billet Spacer
(3) M6x1.0x50mm bolts
(2) 1/8 NPT bung plugs
(2) 90º nozzle adapters
(1) Billet Spacer
(3) 1/4" x .25" x 2-1/2" bolts
(2) 1/8 NPT bung plugs
(2) 90º nozzle adapters
Infiniti Q50/Q60 WMI Water Injection Nozzle Adapters
Vehicle Fitment
• 2016-Present Infiniti Q50/Q60 3.0 Turbo Luxe, Sport, Silver Sport, Red Sport
2021+ Mazda 3 SKYACTIV® 2.5L Turbo WMI Water Injection Nozzle Adapter
Includes a CNC machined fitting to receive 1/8" NPT nozzles, BMS BM5 nozzle, required compression fitting for 1/4" WMI line, extension harness and two mounting screws.
Vehicle Fitment
• 2021+ Mazda 3 SKYACTIV® 2.5 Turbo
Kia / Hyundai Quick Install Water/Methanol Injection (WMI) Adapter
This CNC machined bolt on adapter allows you to mount a single BMS water/methanol injection (WMI) nozzle WITHOUT the expense and headache of removing, drilling, and welding a bung to your factory aluminum charge pipe. Shaves a ton of time off the Stinger water/methanol injection (WMI) install and is fully reversible. We suggest the BM10 nozzle for most Stinger applications. Compatible with most Kia/Hyundai turbo engines. Made in the USA.
This can be included with our complete KIA / Hyundai Water/Methanol Injection Kit.
What's included:
(1) Billet aluminum methanol nozzle adapter
(1) Heavy-duty o-ring
(2) M6 x 1.00 x 60mm stainless hex cap screws
Replacement o-rings can be purchased here.
Looking to install methanol injection, a Hobb's switch, pressure sensor, charge pipe injection, or other any other 1/8" NPT accessory in your charge pipe but don't have the necessary port(s) required? If you have a 2.5" ID silicone charge pipe, this is the perfect solution for you. Our new billet couplers can be installed in your 2.5" ID silicon charge pipe to provide you with two opposing 1/8" NPT/methanol injection bungs.
One side of the coupler has our logo engraved the other side has no engraving for a stealth look.
Charge Pipe Coupler Kit Includes:
(1) Billet aluminum coupler with two 1/8" NPT ports
(2) 1/8" NPT plugs w/thread sealer
Coupler specs:
Overall width = 2.2" (55.88mm)
Outer Diameter =2.9" (73.66mm)
Inner Diameter = 2.3" (58.42mm)
1/8" Ports = Two opposing .35" (8.90mm)
Returns
Our policy lasts 14 days. If 14 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange. All items are subject to 15% restocking fee from the manufacturer.
To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.
Additional non-returnable items:
Gift cards
Downloadable software products
To complete your return, we require a receipt or proof of purchase.
Please do not send your purchase back to the manufacturer.
There are certain situations where only partial refunds are granted (if applicable)
You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of shipping to you will be deducted from your refund. If your original order qualified for free shipping, the actual cost of shipping the item to you will still be deducted from your refund.
If you would like to start a return please click here
Refunds (if applicable)
Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund.
If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within a certain amount of days.
You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of shipping to you will be deducted from your refund. If your original order qualified for free shipping, the actual cost of shipping the item to you will still be deducted from your refund.
Late or missing refunds (if applicable)
If you haven’t received a refund yet, first check your bank account again. Then contact your credit card company, it may take some time before your refund is officially posted. Next contact your bank. There is often some processing time before a refund is posted. If you’ve done all of this and you still have not received your refund yet, please contact us at info@amtuning.ca.
Sale items (if applicable)
Only regular priced items may be refunded, unfortunately sale items cannot be refunded.
Labor Fees (if applicable)
AM Tuning Canada is not responsible for, and shall not be liable for, any labor fees, installation charges, removal charges, diagnostic fees, or other service-related costs incurred by the customer or any third party in connection with the installation, removal, modification, servicing, or use of any products purchased from AM Tuning Canada. Unless expressly agreed to in writing by AM Tuning Canada, all such labor and service costs are the sole responsibility of the customer.
Exchanges (if applicable)
To start an exchange, click here
Non-refundable items
The following items are non-refundable and non-returnable once purchased: oils, fuel or oil additives, filters, tuning cables, OBDeleven products, Braum seats, spark plugs, coil packs, and similar consumable, wheel spacers, wheels bolts, license plate brackets, electronic tuning components and any other product subject to discretion of AM Tuning Canada.
Other products from brands such as MHD, Bootmod3, Ecutek, Braum racing, Novitec are also non-refundable and non-returnable.
All sales of these items are final and are subject to the policies and discretion of AM Tuning. By completing a purchase, the customer acknowledges and agrees to these terms.
