- Description
- Fitment
- Refund Policy
Front splitters are very effective at producing front-end downforce without increasing drag significantly. They do this by creating a large pressure delta between the top and bottom surfaces. Utilizing scan data directly from the car and CFD, we were able to produce a splitter that pairs well with our UCW rear wing and can easily handle the loads seen by the splitter. Splitter tunnels or splitter diffusers were added to increase front end downforce further than a flat blade alone. The splitter mounts to multiple chassis locations for a strong and durable mounting style. All hardware locations are recessed for improved aerodynamic performance.
During research and development, great care and focus was taken to ensure the oil cooler's exit airflow did not adversely hurt splitter performance. We offer a block off plate, an exit duct, and you can run the car with a wide open splitter as well, for varying levels of front on downforce and performance.
The splitter is produced from a carbon polyweave, which is the same material used in high forms of Motorsports. The material is not brittle, so no more issues with cracking like carbon fiber and ABS. It will not grab and bend under the car like aluminum units either. The material is also lightweight and stiff; which makes it a great splitter material.
The air dam is used to bring the splitter flat with the vehicle's underbody and improve performance further. The air dam is produced from sheet aluminum and then powder coated black for durability.
Click Here for installation instructions. An Information Packet is also available.
Kit Includes:
- Two-Piece Carbon Polyweave Splitter Blade
- Three-Piece Aluminum Front Air Dam
- (6) Sheet Steel Chassis Bracket
- (2) Steel Chassis Bracket
- (2) Splitter Diffuser Tunnel
- (1) Oil Cooler Exit Duct
- (1) Oil Cooler Block Off Plate
- Rubber Edge Seal for Air Dam
- Hardware Kit Including All Necessary Bolts/Nuts/Washers for a seamless install
Product Details:
- Greatly Increases Front End Downforce
- Produces High Downforce for Large Rear Wings
- Capable of Handling 300+ Lbs
- Constructed From Carbon Polyweave, Which Offers Strength, Low Weight, Durability, and a Great Appearance
- Same Material Used in Various Forms of Racing, Including Indy Car, NASCAR, and F1
- Splitter Diffusers designed for improved performance
- Integrated Air Dam that Follows The Front Bumper Lines Well
Specifications:
- Front Splitter is Manufactured From Carbon Polyweave, Offering Superior Strength, Weight, Durability, and Appearance to Many Other Options
- Will Not Grab and Bend Surfaces Like Aluminum Units
- Will Not Crack and Break Like Carbon and ABS Units
- Abrasive Resistant While Stiff
- 5052 Aluminum Air Dam
- Carbon Diffuser Tunnels
- CNC Cut and Bent Brackets
- Stainless Hardware Throughout
Returns
Our policy lasts 14 days. If 14 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange. All items are subject to 15% restocking fee from the manufacturer.
To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.
Additional non-returnable items:
Gift cards
Downloadable software products
To complete your return, we require a receipt or proof of purchase.
Please do not send your purchase back to the manufacturer.
There are certain situations where only partial refunds are granted (if applicable)
You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of shipping to you will be deducted from your refund. If your original order qualified for free shipping, the actual cost of shipping the item to you will still be deducted from your refund.
If you would like to start a return please click here
Refunds (if applicable)
Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund.
If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within a certain amount of days.
You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of shipping to you will be deducted from your refund. If your original order qualified for free shipping, the actual cost of shipping the item to you will still be deducted from your refund.
Late or missing refunds (if applicable)
If you haven’t received a refund yet, first check your bank account again. Then contact your credit card company, it may take some time before your refund is officially posted. Next contact your bank. There is often some processing time before a refund is posted. If you’ve done all of this and you still have not received your refund yet, please contact us at info@amtuning.ca.
Sale items (if applicable)
Only regular priced items may be refunded, unfortunately sale items cannot be refunded.
Exchanges (if applicable)
To start an exchange, click here
Non-refundable items
The following items are non-refundable and non-returnable once purchased: oils, fuel or oil additives, filters, tuning cables, OBDeleven products, Braum seats, spark plugs, coil packs, and similar consumable, wheel spacers, wheels bolts, license plate brackets, electronic tuning components and any other product subject to discretion of AM Tuning Canada.
Other products from brands such as MHD, Bootmod3, Ecutek, Braum racing, Novitec are also non-refundable and non-returnable.
All sales of these items are final and are subject to the policies and discretion of AM Tuning. By completing a purchase, the customer acknowledges and agrees to these terms.
