- Description
- Fitment
- Refund Policy
The NEUSPEED Macan Brake Upgrade Kit provides big improvements for those upgrading their factory brake systems to the Porsche Macan Caliper Kit. This upgrade kit offers our Full-Floating, Two-Piece 345mm Brake Rotors, iSWEEP Performance Brake Pads in various compounds to meet your needs, and our famous made-to-order Stainless Steel Sport Brake Lines.
This brake kit is specifically designed for Audi Q3 8U/F3 and Volkswagen Taos Mk1 and Tiguan Mk1/Mk2/Mk3 vehicles using factory Porsche Macan 95B 4-Piston Front Calipers:
Porsche caliper part #:
- 95B-615-123-F
- 95B-615-124-F
FULL-FLOATING 2-PIECE ROTORS
Benefits of using a Full-Floating 2-Piece Rotor are reduced weight, lower risk of warping, increased airflow, better heat management/dissipation, and cost savings over time.
Aluminum, by nature, weighs much less than a cast-iron rotor (factory type). With an aluminum center, this weight savings is unsprung and rotating. You can expect shorter stopping distances, quicker acceleration, better handling and cornering, and even improved fuel economy!
Along with reducing weight, our Full-Floating 2-Piece rotors also help with heat dissipation. Since the center of the rotor (hat) is not one piece with the ring, heat transfer is minimized. So, instead of it being one large steel disc that retains heat built up over time, the outer ring deals with heat maintenance while the inner hat can do its job at holding everything together.
The cast-iron disc can expand radially, or outwards, relative to the aluminum hat. The cast-iron disc will heat up (can reach more than 1100 degrees Fahrenheit), while the aluminum hat remains cool. Because of this, they're less likely to warp or crack from excessive heat.
FULL STAINLESS STEEL BRAKE LINES
At NEUSPEED, we're known for our custom brake lines and brake line fittings. Others make stainless steel "braided" brake lines, but they still use steel fittings which can easily corrode over time. NEUSPEED lines are the only ones in the US that utilize full stainless steel fittings, not just the hose.
For this Macan upgrade kit, we specially design the swivel fitting on the caliper side so the hose has a correct angle for the MK5/6/7 to eliminate any binding. Others just sell the extended version male fitting that is commonly used for Audi 8K/B8 models.
iSWEEP BRAKE PADS
We have everything, from super-clean IS1500 street, all the way to Endurance race compound! All made in Japan backed with iSWEEP quality. iSWEEP street pads also feature a provision for brake wear sensor, no bypass is needed. These are optional.
Notes
-
Features
- Rotor Size: 345x30mm
- Rotor Weight: 18.2 lbs. - (OEM: 26.6 lbs.)
- 7075-T6 Alloy Hat (compared to competitors 6061-T6)
- Stainless Steel D-Bobbin Hardware
- Slotted Pattern, Directional and Curved Veins
-
KIT INCLUDES
- 1x Left 345x30mm Full-Floating 2-Piece Slotted Rotor
- 1x Right 345x30mm Full-Floating 2-Piece Slotted Rotor
- 1x Set of NEUSPEED Stainless Steel Sport Brake Lines
- 1x Set of NEUSPEED Grade 5 Titanium Brake Pad Shims
-
Other
- iSWEEP Performance Brake Pads optional, see product add-ons.
- Kit does NOT include wear sensor or sensor bypass
- See sensor options below
Returns
Our policy lasts 14 days. If 14 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange. All items are subject to 15% restocking fee from the manufacturer.
To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.
Additional non-returnable items:
Gift cards
Downloadable software products
To complete your return, we require a receipt or proof of purchase.
Please do not send your purchase back to the manufacturer.
There are certain situations where only partial refunds are granted (if applicable)
You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of shipping to you will be deducted from your refund. If your original order qualified for free shipping, the actual cost of shipping the item to you will still be deducted from your refund.
If you would like to start a return please click here
Refunds (if applicable)
Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund.
If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within a certain amount of days.
You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of shipping to you will be deducted from your refund. If your original order qualified for free shipping, the actual cost of shipping the item to you will still be deducted from your refund.
Late or missing refunds (if applicable)
If you haven’t received a refund yet, first check your bank account again. Then contact your credit card company, it may take some time before your refund is officially posted. Next contact your bank. There is often some processing time before a refund is posted. If you’ve done all of this and you still have not received your refund yet, please contact us at info@amtuning.ca.
Sale items (if applicable)
Only regular priced items may be refunded, unfortunately sale items cannot be refunded.
Labor Fees (if applicable)
AM Tuning Canada is not responsible for, and shall not be liable for, any labor fees, installation charges, removal charges, diagnostic fees, or other service-related costs incurred by the customer or any third party in connection with the installation, removal, modification, servicing, or use of any products purchased from AM Tuning Canada. Unless expressly agreed to in writing by AM Tuning Canada, all such labor and service costs are the sole responsibility of the customer.
Exchanges (if applicable)
To start an exchange, click here
Non-refundable items
The following items are non-refundable and non-returnable once purchased: oils, fuel or oil additives, filters, tuning cables, OBDeleven products, Braum seats, spark plugs, coil packs, and similar consumable, wheel spacers, wheels bolts, license plate brackets, electronic tuning components and any other product subject to discretion of AM Tuning Canada.
Other products from brands such as MHD, Bootmod3, Ecutek, Braum racing, Novitec are also non-refundable and non-returnable.
All sales of these items are final and are subject to the policies and discretion of AM Tuning. By completing a purchase, the customer acknowledges and agrees to these terms.
