IE's 4.0TT ECU tune for the Audi C8 platform is a total transformation delivering supercar performance and maximized power delivery. With our cutting-edge modern motorsport tuning approach, your twin-turbocharged V8 engine's potential is fully realized while maintaining total comfort and reliability. Release the hidden power and heighten your driving experience with a simple install that takes only minutes.
IE Audi 4.0T V8 EA825 ECU Tune For C8 RS6, RS7, S8, SQ7, SQ8, & RSQ8
- Description
- Fitment
- Refund Policy
PUMP GAS & ETHANOL
POWER OPTIONS
MULTIPLE OCTANES
SUPERCAR POWER
828HP / 862TQ
IN ONLY MINUTES
EASY INSTALL
FLASH AT HOME
PLUG AND PLAY
LEADING FEATURES
- Horsepower & torque gains maximized
- 91, 93, 104, E40, & E85 fuel maps included
- Compatible with all stock hardware
- Get the most performance with upgraded intake and intercooler
- Stage 1 Transmission Tune included with ECU purchase
- Harder and more aggressive launch strategy
- Brake boost enabled for rolling launch
- Recalibrated factory boost gauge displays higher boost
- Rescaled horsepower and torque gauge displays
- Gauge display needle animations smoothed (less glitchy)
- Unused ECU tuning strategies activated and tuned
- Auto start/stop disabled (button turns on instead of off)
- Neutral/park rev limit raised
- Enhanced exhaust overrun crackle in sport mode
- Maximized map scaling for dependable throttle use
- Boost control reconfigured for smooth and crisp power delivery
- Optimized EGT for safe fuel ratios and maximized power output
- Reduced turbocharger lag
- Road speed limiters removed
- Engineered for all climates and elevations
- Direct port OBDII at-home flashing
- Easy octane switching takes only minutes
- Read and clear diagnostic/problem codes
- Easy to use Data-logger
C8 4.0T STAGE 1 ECU TUNE
IE Stage 1 C8 EA825 ECU calibration dramatically increases hidden performance with up to 828HP and 862ft-lbs! IE's advanced tuning platform releases hidden power, maximizes the drive feel, boost delivery, throttle response, and powerband to completely transform your 4.0TT engine into a supercar powerhouse. Engineered to operate on entirely stock hardware or with an upgraded intake and intercoolers for the most performance.
See performance tab for full performance results & dyno reports
INCLUDED OCTANES
Your IE tune purchase includes multiple fuel options that offer dramatic power increases. Using your IE POWERlink, switch between octanes as often as you like allowing you to run 91/93 pump gas or flash to our race gas 104 or ethanol files for a massive increase in HP & TQ in only minutes.
FULL E85
Flashing the E85 fuel map allows easy fill-ups at the pump without mixing ethanol blends. This ethanol calibration delivers a massive increase in power over regular 91/93 pump gas while keeping mid-range power in check with the factory direct injection (DI) system and avoiding lean conditions, misfires, and power loss. E85 offers amazingly fast and consistent power delivery from the pump and is much less expensive than race gas.
E40 BLEND
Ready to experience an absolute torque monster!? Mixing regular 91/93 pump gas and E85 at a 40% ethanol content (E40) creates a blend that stays within the safe limit of fuel delivery for the factory injectors. This allows the E40 calibration to produce the full torque output available from the twin-turbo V8, resulting in an insane 862ft-lbs of torque that translates to a pull with seat slamming g-forces.
An ethanol content sensor kit is highly recommended when running ethanol blends.
104 RACE GAS
In areas that do not have readily available ethanol or track enthusiasts with accessable race fuel pumps, the included 104-octane race gas file also succeeds in a considerable jump in power over regular pump gas. Sunoco GT260 Plus 104 octane is used to develop this tune and is highly recommended for the best results.
ADVANCED MAPPING
The factory ECU calibration is full of regulations and compromises that limits horsepower/torque and dull the power delivery and throttle feedback. IE calibrators re-tuned the complicated mass flow modeled boost control mapping with advanced strategies to achieve precision boost request targeting that results in unmatched power delivery. The throttle mapping also receives a significant rewrite to deliver a linear and predictable throttle feedback. These refinements result from months and months of fine details that dramatically improves your conneciton to the car with a much sportier and precise feel.
BRAKE BOOST
Commonly used in roll racing, Brake Boosting allows you to build extra turbo boost by applying brake pressure while accelerating. Release the brake pressure for a "rolling launch" and leg up on the competition.
EGT OPTIMIZATION
Exhaust Gas Temperature (EGT) is the measurement of fuel mixtures exiting the exhaust and is used to determine the health of the fuel/air mixture entering the engine. IE engineers have spent countless hours adjusting boost air/fuel ratio, ignition timing angle, camshaft phasing, intake air temps, and much more to develop the proper EGT adjustments for ultimate engine safety without sacrificing power on all octanes.
HARDWARE GUIDE
STAGE 1 COMPATABILITY
PART UPGRADE | COMPATIBLE | REQUIREMENT |
STAGE 1 TCU TUNE (INCLUDED) |
|
Required |
AIR INTAKE |
|
Recommended for the highest power gain |
TURBO INLETS |
|
Fully compatible |
INTERCOOLER |
|
Fully compatible |
CATBACK EXHAUST |
|
Fully compatible |
DOWNPIPES |
X |
Not Compatible With Stage 1 |
MAXIMIZED OUTPUT
This is not a simple dyno tune. IE's in-house calibration systems were used to reverse-engineer the factory ECU mapping on a professional OEM motorsport level. This grants our calibrators access to every ECU mapping parameter and the ability to add custom programming as necessary. Additional sensors and data collection systems are added as required to completely realign all safety protocols and sensors for the new max-performance ECU tune. Every tune parameter undergoes months of testing on our in-house dyno systems that utilize the world's only Sea Level Generator developed specifically to verify tune operations in any condition. Confidently drive from LA to Pikes Peak with power that will keep you smiling every mile!
POWER GAINS
North American Region (NAR) = AKI / Rest Of World (ROW) = RON
STAGE / FUEL | HORSEPOWER | TORQUE |
Stock Audi advertised numbers (RS6/RS7) |
591 HP |
590 FT-LBS |
Stock IE dyno numbers (RS6/RS7) |
591 HP |
616 FT-LBS |
Stage 1 91 AKI / 95 RON |
668 HP |
768 FT-LBS |
Stage 1 93 AKI / 98 RON |
690 HP |
780 FT-LBS |
Stage 1 104 AKI / 108 RON |
800 HP |
821 FT-LBS |
Stage 1 E85 |
800 HP |
745 FT-LBS |
Stage 1 E40 |
828 HP |
862 FT-LBS |
Dyno numbers are for reference against stock numbers only. Personal & competitor dyno results will vary depending on fuel quality, local conditions, dyno brand, and correction factors.
EASY INSTALL FROM HOME
IE's POWERlink Cable and Flash Wizard software gives you the freedom to quickly flash your new IE ECU Tune. Simply plug your POWERlink into the vehicle's OBD-2 port and follow the on-screen directions, it's that easy!
Expand the buttons below for more details on these features
DIRECT PORT
OCTANE SWITCHING
UPGRADE STAGES
TOGGLE FEATURES
CODE READER
DATA LOGGER
FITMENT GUIDE
MAKE | MODEL | YEAR | GENERATION |
AUDI |
RS6 |
2021+ |
C8 |
AUDI |
RS7 |
2021+ |
C8 |
AUDI |
SQ7 |
2021+ |
C8 |
AUDI |
S8 |
2021+ |
Please contact us to confirm compatability |
AUDI |
SQ8 |
2021+ |
Please contact us to confirm compatability |
AUDI |
RSQ8 |
2021+ |
Please contact us to confirm compatability |
Not compatible with euro6 particulate emissions ROW (Rest Of World) GPF equipped vehicles.
IMPORTANT INFORMATION
TUNE UPDATES
Your tune purchase entitles you to free updates to any tune revisions, new octanes, standard features, or software updates. In the event the original vehicle manufacturer issues an ECU update, this will also be included to you through IE at no additional charge.
POWERLINK VINS
Have multiple cars in the family or friends that are also ready for an IE Tune? Your POWERlink Flash Tool can be used on up to 5 different vehicle VINs. Tunes sold separately.
TUNE REGISTRATION
Once a tune purchase is applied to your vehicle's ECU, the tune is permanently registered to the vehicle and non-transferable to other vehicles. Tunes can be transferred to a second party in the event of vehicle transfer of ownership only.
REQUIRES V4 IE POWERLINK
The Audi MG1 uses new and updated flashing protocols to read and write the ECU and TCU information. Older V3 IE POWERlinks do not include the required internal hardware need to flash the B9 2.0T calibrations. If you are purchasing credits with an existing IE POWERLINK, please be sure your serial number on the back begins with V4.
ENGINE SPECS
ENGINE FAMILY |
EA825 (MG1 ECU) |
CYLINDERS |
8 |
INDUCTION |
Twin-turbocharged |
DISPLACEMENT |
4.0L |
ORIENTATION |
Longitudinal |
FUEL |
Gasoline (AKI / RON) & Ethanol (tuned only) |
AVAILABILITY RESTRICTIONS |
NOT compatible with GFI equipped vehicles found in the EU |
Our policy lasts 14 days. If 14 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange.
To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.
Note:
* Customer must pay for the shipping to the original manufacturer.
Several types of goods are exempt from being returned. Perishable goods such as food, flowers, newspapers or magazines cannot be returned. We also do not accept products that are intimate or sanitary goods, hazardous materials, or flammable liquids or gases.
Additional non-returnable items:
* Gift cards
To complete your return, we require a receipt or proof of purchase.
Please do not send your purchase back to the manufacturer.
There are certain situations where only partial refunds are granted: (if applicable)
* Book with obvious signs of use
* Any item not in its original condition, is damaged or missing parts for reasons not due to our error.
* Any item that is returned more than 14 days after delivery
Refunds (if applicable)
Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund.
If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within a certain amount of days.
Late or missing refunds (if applicable)
If you haven’t received a refund yet, first check your bank account again.
Then contact your credit card company, it may take some time before your refund is officially posted.
Next contact your bank. There is often some processing time before a refund is posted.
If you’ve done all of this and you still have not received your refund yet, please contact us at info@amtuning.ca
Exchanges
We only replace items if they are defective or damaged. If you need to exchange it for the same item, send us an email at amtuning.ca@outlook.com labelled as “Defective Item”
Gifts
If the item was marked as a gift when purchased and shipped directly to you, you’ll receive a gift credit for the value of your return. Once the returned item is received, a gift certificate will be mailed to you.
If the item wasn’t marked as a gift when purchased, or the gift giver had the order shipped to themselves to give to you later, we will send a refund to the gift giver and he will find out about your return.
Shipping
You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.
Depending on where you live, the time it may take for your exchanged product to reach you, may vary.
If you are shipping an item over $75, you should consider using a trackable shipping service or purchasing shipping insurance. We don’t guarantee that we will receive your returned item.
Customers also bought
$93.83
$110.39