- Description
- Fitment
- Refund Policy
NO PERFORMANCE TUNE NEEDED.
For over 30 years, Active Autowerke has been the one to turn to for high quality BMW performance products. Committed to enhancing the performance of BMWs through the highest quality products is what Active Autowerke is all about. The newest addition to our BMW S68 Collection, these S68T downpipes represents our outlook on creating innovative products with performance in mind - these are similar to the G90 M5 downpipes but fit the exhaust pipes of the X-body cars.
The S68T downpipes are strategically engineered to virtually eliminate the immensely restrictive characteristics of the factory downpipes therefore reducing radiant heat and increasing performance. Our S68T downpipes will significantly increase horsepower and torque throughout the powerband. They will reduce any turbo lag
Our S68T downpipes are manufactured in house using 304 stainless steel. Each set is meticulously tig welded and checked for perfect fitment. Our design uses a factory matched offset inlet that tapers to a high flowing, mandrel bent" body and includes the lower section sold by others as a "mid-pipe".
**Our downpipes allow the use of the OEM O2 sensor heat shield. With the heat shield installed the engine bay remains stock-looking for a sleeper look!
This variant includes a pair of 5" high flow Active AFlow catalytic converters that will NOT produce a CEL!
The Active AFlow Super High Output Catalytic Converter features full 304 stainless steel construction, including the substrate. Active AFlow Series Catalytic Converters are EPA registered and compliant in 49 states and fully OBD2 compliant, perfect for use on 1996 and newer vehicles. Active proprietary precious metal loading technology ensures greatly reduced emissions, eliminating most "Check Engine Lights". These high flow catalytic converters outperform stock converters and provide a reliable solution to the most common catalytic converter problems.
The Active AFlow Series Catalytic Converters are rated for engines putting out up to 1,000 horsepower while maintaining a high flow capacity. The reduced back-pressure from this high flow catalytic converter will allow you to maximize your engines horsepower without the harmful emissions. Say goodbye to Check Engine Lights and failed emissions tests!
Please Note: These catalytic converters are not legal for use on vehicles registered in the state of California as a result of California Vehicle Code Section 27156 and 38391.
NOTE: Federal law prohibits the tampering of an emissions control device. Mobile Source Enforcement Memorandum 1A, allows for aftermarket parts to be used in the repair or replacement of emissions control systems, provided the emissions aren't adversely affected. There is no mention or reference to cell density or converter volume dimension. The Active AFlow catalytic converter will produce emissions that will meet the standards set by the EPA, not CARB.
Features:
-
NO CEL for catalytic efficiency when using this downpipe
-
Active EPA registered high flow and fully OBD2 compliant
-
Casted upper stainless steel V-Band for precise fitment
-
3" diameter piping allows for maximum power output
-
Quicker turbo spool
-
Rated for up to 1,000 hp applications
-
Withstands up to 1500 F
-
Can reach operational efficiency within 9 seconds of startup
-
Easily bolts-on no cutting or welding required
- Accepts OEM O2 sensor heat shield
-
Durable construction from TIG welded 304 stainless steel
-
Precise fitment
-
Ultra high flow 400 cell per square inch catalyst
-
EPA compliant for use on OBD2 vehicles (1996 and newer) except in California
-
304 stainless steel substrate is furnace braised to the mantle for outstanding durability
-
Active proprietary precious metal loading technology ensures greatly reduced emissions
-
Ideal for Forced Induction Applications with no loss of HP
-
Both passengers and drivers are safe from harmful emissions and noise
-
Covered by 5 Year / 50,000 Mile Warranty (on shell and tube ends) and 2 year / 25,000 Mile Warranty on the Catalytic core to original purchaser only - NOTE: warranty will be null and void if your car has excessive burble (greater than stock) as that physically destroys the catalytic core
-
Made in Miami, Florida
Vehicle information: A vehicle VIN is required to confirm fitment before supplier fulfillment. Please provide your VIN with your order.
Returns
Our policy lasts 14 days. If 14 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange. All items are subject to 15% restocking fee from the manufacturer.
To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.
Additional non-returnable items:
Gift cards
Downloadable software products
To complete your return, we require a receipt or proof of purchase.
Please do not send your purchase back to the manufacturer.
There are certain situations where only partial refunds are granted (if applicable)
You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of shipping to you will be deducted from your refund. If your original order qualified for free shipping, the actual cost of shipping the item to you will still be deducted from your refund.
If you would like to start a return please click here
Refunds (if applicable)
Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund.
If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within a certain amount of days.
You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of shipping to you will be deducted from your refund. If your original order qualified for free shipping, the actual cost of shipping the item to you will still be deducted from your refund.
Late or missing refunds (if applicable)
If you haven’t received a refund yet, first check your bank account again. Then contact your credit card company, it may take some time before your refund is officially posted. Next contact your bank. There is often some processing time before a refund is posted. If you’ve done all of this and you still have not received your refund yet, please contact us at info@amtuning.ca.
Sale items (if applicable)
Only regular priced items may be refunded, unfortunately sale items cannot be refunded.
Labor Fees (if applicable)
AM Tuning Canada is not responsible for, and shall not be liable for, any labor fees, installation charges, removal charges, diagnostic fees, or other service-related costs incurred by the customer or any third party in connection with the installation, removal, modification, servicing, or use of any products purchased from AM Tuning Canada. Unless expressly agreed to in writing by AM Tuning Canada, all such labor and service costs are the sole responsibility of the customer.
Exchanges (if applicable)
To start an exchange, click here
Non-refundable items
The following items are non-refundable and non-returnable once purchased: oils, fuel or oil additives, filters, tuning cables, OBDeleven products, Braum seats, spark plugs, coil packs, and similar consumable, wheel spacers, wheels bolts, license plate brackets, electronic tuning components and any other product subject to discretion of AM Tuning Canada.
Other products from brands such as MHD, Bootmod3, Ecutek, Braum racing, Novitec are also non-refundable and non-returnable.
All sales of these items are final and are subject to the policies and discretion of AM Tuning. By completing a purchase, the customer acknowledges and agrees to these terms.
