034 Motorsport Suspension Lift Kit, Audi F3 Q3 & Volkswagen MK2 Tiguan
- Description
- Fitment
- Refund Policy
Product Description:
The 034Motorsport Suspension Lift Kit for Audi F3 Q3 & Volkswagen MK2 Tiguan is the ultimate solution for thrill seekers looking to improve ground clearance and lift their vehicles. The Suspension Lift Kit adds 1.3” of ride height in the front and 1.18” of ride height in the rear, resulting in a level, no-rake lifted height that significantly improves ground and fender clearance. This lift is perfect for overlanders and parking lot speed bump crawlers alike.
When lifting a vehicle, the suspension responds with a positive camber and caster increase, which reduces the tire’s contact patch and significantly increases tire wear, as well as altering the tire's position within the wheel well - potentially allowing the tire to contact the fender liner. The 034Motorsport Suspension Lift Kit for the Audi F3 Q3 & Volkswagen MK2 Tiguan utilizes 6061-T6 Aluminum with precision-machined slots to allow users to maintain factory camber and caster alignment specifications. This restored caster can decrease the clearance of large tire setups while making the suspension more responsive. For this reason, we also offer a slot for camber-only correction. 034Motorsport recommends utilizing the camber and caster correction slot for the best performance if your tire size allows it.
Density Line Adjustable Rear Toe Links
Lifting your Q3 or Tiguan wouldn’t be possible without the addition of Density Line Adjustable Rear Toe Links. These adjustable toe links enable adequate alignment adjustment at the newly raised ride height, as the fixed, stamped steel factory rear toe links do not provide sufficient adjustment.
Density Line Adjustable Rear Toe Links offer the range and precision needed to set proper rear toe after a lift, improving stability, tracking, and tire wear. Their adjustability makes alignment changes easy, whether you’re restoring factory geometry or tuning for off-road use.
Each link uses Forged Steel Threaded Rod Ends with 90-durometer rubber bushings for durability and reduced deflection, ensuring consistent suspension geometry through rough terrain and heavy articulation.
Features:
- CNC-Machined from 6061-T6 Aluminum with Clear Anodized Finish
- Front Lift: 34mm (1.3")
- Rear Lift: 13mm (1.18")
- Minimal NVH Added
- Easily Reversible, Completely Bolt-In
- Aluminum Won't Pack Out Over Time
- Built-in Camber and Caster Offset to Retain Factory Alignment Specs
- Camber Only Option to Prevent Fender Liner Rubbing on Big Tire Setups
- Spring Centering Cups on the Rear
- Reuses Stock Rear Spring Isolator
- Includes Density Line Toe Links for Precise Toe Adjustments to Improve Stability, Tracking, and Tire Wear
Returns
Our policy lasts 14 days. If 14 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange. All items are subject to 15% restocking fee from the manufacturer.
To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.
Additional non-returnable items:
Gift cards
Downloadable software products
To complete your return, we require a receipt or proof of purchase.
Please do not send your purchase back to the manufacturer.
There are certain situations where only partial refunds are granted (if applicable)
You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of shipping to you will be deducted from your refund. If your original order qualified for free shipping, the actual cost of shipping the item to you will still be deducted from your refund.
If you would like to start a return please click here
Refunds (if applicable)
Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund.
If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within a certain amount of days.
You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of shipping to you will be deducted from your refund. If your original order qualified for free shipping, the actual cost of shipping the item to you will still be deducted from your refund.
Late or missing refunds (if applicable)
If you haven’t received a refund yet, first check your bank account again. Then contact your credit card company, it may take some time before your refund is officially posted. Next contact your bank. There is often some processing time before a refund is posted. If you’ve done all of this and you still have not received your refund yet, please contact us at info@amtuning.ca.
Sale items (if applicable)
Only regular priced items may be refunded, unfortunately sale items cannot be refunded.
Exchanges (if applicable)
To start an exchange, click here
Non-refundable items
The following items are non-refundable and non-returnable once purchased: oils, fuel or oil additives, filters, tuning cables, OBDeleven products, Braum seats, spark plugs, coil packs, and similar consumable, wheel spacers, wheels bolts, license plate brackets, electronic tuning components and any other product subject to discretion of AM Tuning Canada.
Other products from brands such as MHD, Bootmod3, Ecutek, Braum racing, Novitec are also non-refundable and non-returnable.
All sales of these items are final and are subject to the policies and discretion of AM Tuning. By completing a purchase, the customer acknowledges and agrees to these terms.
