{"title":"Suspension","description":"","products":[{"product_id":"emmanuele-design-vw-mk7-audi-8v-lowering-spring-kit-with-rear-spring-pads","title":"Emmanuele Design VW MK7-Audi 8V Lowering Spring Kit with rear spring pads","description":"\u003cdiv class=\"ProductSubtitle\"\u003eDescription\u003c\/div\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv class=\"grid-item medium--one-sixth large--one-sixth push--one-sixth item-product-thumbnails\" align=\"center\"\u003e\u003cb\u003eLowering spring kit from our friends at Emmanuele Design!\u003c\/b\u003e\u003c\/div\u003e\r\n\u003cp\u003e\u003cb\u003eProudly Made In The USA featuring updated front spring design\u003c\/b\u003e\u003c\/p\u003e\r\n\u003cp\u003eOne of the most frequent complaints that we hear from customers after installing lowering springs is the poor ride quality. On the MQB platform, progressive lowering springs will typically create a \"bouncy\" scenario where the rear of the car will tend to become uncomfortable and unpredictable on rough roads. Our fix for this has usually been to add stiffer rear shocks, which will limit the issue. But for customers with magnetic suspension, this is a more intensive process and requires removing an expensive factory feature.\u003c\/p\u003e\r\n\u003cp\u003eTaking our experience on the MQB platform, along with testing on our in-house S3 and MK7 GTI, we have developed what we feel is the best lowering spring option for those wishing to utilize factory dampers. Using a linear design (similar to OEM) with unique spring rates, our lowering springs are properly matched to the factory dampers, ensuring a ride quality that is slightly stiffer than stock, but predictable in nature. A progressive spring will typically be softer at light loads, then dramatically stiffen as compression increases. In our experience on the MQB platform, this makes it very hard to match dampening, and creates the bouncy feeling over light bumps.\u003c\/p\u003e\r\n\u003cp\u003eOur linear design has a consistent rate as the spring sees higher load. So on light bumps, it will allow the chassis to follow the road well (minimizing the bouncy feeling), while under heavy compression it will stiffen to prevent bottoming out. In our experience, this creates a much better overall ride quality.\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eLowering Specs:\u003c\/b\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eApproximately 1.0\" Front \u0026amp; Rear On Golf R \u003c\/li\u003e\r\n\u003cli\u003eApproximately 1.2\" Front \u0026amp; Rear On GTI\u003c\/li\u003e\r\n\u003cli\u003eApproximately 1.6\" Front \u0026amp; Rear On Golf\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003c\/div\u003e","brand":"EMD Auto","offers":[{"title":"Default Title","offer_id":44309840691364,"sku":"EMD-MQB-LS","price":384.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0013\/9929\/1964\/products\/emd-mqb-ls.jpg?v=1680247558"},{"product_id":"cts-mqb-front-subframe-bushing-kit-with-subframe-bolts","title":"CTS MQB MK7, MK8, 8V, 8Y, 8S Front Subframe Bushing Kit (With Subframe Bolts)","description":"\u003cdiv class=\"ProductSubtitle\"\u003eDescription\u003c\/div\u003e\r\n\u003cdiv\u003e\r\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eThe CTS MQB Front Subframe Bushing Kit is great upgrade for all owners looking to improve the handing and performance of their\u003c\/span\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e cars. \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eThis kit replaces the factory hardware and is designed to center and secure the subframe in place. Machined from \u003cspan\u003e6061 T6 aluminum, \u003c\/span\u003e\u003cspan\u003ethe CTS subframe bracket surpasses the OEM bracket in rigidity and isolates the suspension geometry of the front end. The\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e bushing inserts fill the voids of the mounting holes and keeps the subframe centered. This prevents the subframe from shifting and delivers \u003c\/span\u003e\u003cspan\u003ebetter steering responsive and driver feedback.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e","brand":"CTS Turbo","offers":[{"title":"Default Title","offer_id":44309840855204,"sku":"CTS-HW-262","price":263.91,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0013\/9929\/1964\/products\/cts-hw-262_1.jpg?v=1680247582"},{"product_id":"cts-mqb-rear-subframe-mount-insert-kit-mk7-golf-r-mk3-tt-8v-a3-s3","title":"CTS MQB Rear Subframe Mount Insert Kit: MK7 Golf R - MK3 TT - 8V A3 S3","description":"\u003cdiv class=\"ProductSubtitle\"\u003eDescription\u003c\/div\u003e\r\n\u003cdiv\u003e\r\n\u003cp\u003eThe CTS MQB Rear Subframe Mount Insert Kit is designed to improve the responsiveness of the rear suspension and differential for the MQB Platform. MQB Audi\/Volkswagens come equipped with Haldex AWD and use rear subfame mounts made of rubber. When driven at the limit these can cause the rear end to feel sloppy. This kit is engineered to fill the voids in the factory mounts while limiting vertical movement. This maintains the rear geometry of the rear suspension allowing for better cornering and a more responsive driving experience. \u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eWe highly recommend replacing the factory torque-to-yeild bolts when installing these inserts. \u003c\/b\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eIncluded:\u003c\/b\u003e\u003c\/p\u003e\r\n\u003cp\u003e2 x CTS Billet Aluiminum MQB AWD Rear Subframe Insert (Front)\u003c\/p\u003e\r\n\u003cp\u003e2 x CTS Billet Aluiminum MQB AWD Rear Subframe Insert (Rear)\u003c\/p\u003e\r\n\u003cp\u003e4 x Rear Subframe Stretch Bolts (recommended) - N91096401 \u003c\/p\u003e\r\n\u003c\/div\u003e","brand":"CTS Turbo","offers":[{"title":"Default Title","offer_id":44309840887972,"sku":"CTS-HW-257","price":114.74,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0013\/9929\/1964\/products\/cts-hw-257.jpg?v=1680247596"},{"product_id":"emmanuele-design-emmotion-volkswagen-mk7-gti-rear-sway-bar-upgrade","title":"Emmanuele Design eMMOTION Volkswagen MK7 GTI Rear Sway Bar Upgrade","description":"\u003cp\u003eFor those looking for the next step in improved handling, we are pleased to release our rear sway bar upgrade for the MK7 Golf \u0026amp; GTI. Intended to be paired with our lowering spring kit, the rear sway bar upgrade will reduce body roll to create a more neutral steering balance. This sway bar upgrade is specifically designed to function with the OEM front sway bar, getting rid of the factory under-steer while allowing enough compliance for a comfortable ride and predictable suspension behavior.\u003c\/p\u003e\r\n\u003cp\u003eOEM 20mm Sway Bar Rate: 333 lb.\/in.\u003c\/p\u003e\r\n\u003cp\u003eeMMOTION Sway Bar Rate: 520 lb.\/in.\u003c\/p\u003e\r\n\u003cp\u003e\u003ci\u003eWhat's In The Box?\u003c\/i\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eSway Bar\u003c\/b\u003e\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e- The sway bar is a 22.2mm solid bar that is manufactured in the USA from high quality spring steel. We opted for a solid design, as it ensures that our sway bar will last a lifetime of abuse without risk of breakage or deformation. In order to maintain the factory suspension geometry (for those using stock end links), we opted for a non-adjustable design.\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eBillet Brackets\u003c\/b\u003e\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e- Included with each sway bar is a set of our custom billet brackets. Through CAD design and stress analysis, we developed a stronger alternative to typical stamped brackets. Each bracket is CNC machined, anodized black and finished with a stealth \"e\".\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eUpgraded Bushings\u003c\/b\u003e\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e\u003cspan\u003e- The included bushings are designed to minimize noise typically associated with polyurethane bushings. Using a unique interior groove, the bushing is able to better hold and maintain lubricating grease. This ensures continued usage without developing squeaks and creaks.\u003c\/span\u003e\u003c\/p\u003e","brand":"EMD Auto","offers":[{"title":"Default Title","offer_id":44309841281188,"sku":"EMD-MQB-RSB","price":369.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0013\/9929\/1964\/products\/emd-mqb-rsb.jpg?v=1680247656"},{"product_id":"cts-turbo-rear-subframe-bushing-insert-kit-mk5-mk6-mk7-8p-mk2-audi-tt-fwd","title":"CTS TURBO Rear Subframe Bushing Insert Kit: MK5-MK6-MK7-8P-MK2 Audi TT (FWD)","description":"CTS Turbo is proud to announce our new billet rear subframe bushing insert kit (applications listed below).  This kit is designed to eliminate the large factory tolerances at the subrame mounting points.  These subframe bushings centrally locate the rear subframe and have been known to eliminate fender rubbing issues due to shifted subframes even on the newest of factory cars. \r\n\r\nSpecifications:\r\nT6061 Billet aluminium\r\nDirect fit\r\n\r\nKit Components:\r\n4 x Upper Insert\r\n4 x Lower Insert\r\n4 x OE Bolts\r\n","brand":"CTS Turbo","offers":[{"title":"Default Title","offer_id":44309849112740,"sku":"CTS-HW-216","price":107.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0013\/9929\/1964\/products\/cts-hw-216.jpg?v=1680248323"},{"product_id":"cts-turbo-rear-subframe-bushing-insert-kit-mk5-mk6-mk7-8p-mk2-audi-tt","title":"CTS TURBO Rear Subframe Bushing Insert Kit: MK5-MK6-MK7-8P-MK2 Audi TT","description":"CTS Turbo is proud to announce our new billet rear subframe bushing insert kit (applications listed below).  This kit is designed to eliminate the large factory tolerances at the subrame mounting points.  These subframe bushings centrally locate the rear subframe and have been known to eliminate fender rubbing issues due to shifted subframes even on the newest of factory cars. \r\n\r\nSpecifications:\r\nT6061 Billet aluminium\r\nDirect fit\r\n\r\nKit Components:\r\n4 x Upper Insert\r\n4 x Lower Insert\r\n4 x OE Bolts\r\n","brand":"CTS Turbo","offers":[{"title":"Default Title","offer_id":44309849145508,"sku":"CTS-HW-216-2","price":99.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0013\/9929\/1964\/products\/cts-hw-216_1.jpg?v=1680248335"},{"product_id":"solo-werks-s1-coilover-vw-mk-v-mk-vi-05-15-w-rear-multi-link-susp","title":"SOLO WERKS S1 COILOVER - VW MK V \u0026 MK VI '05-'15 (W- REAR MULTI-LINK SUSP)","description":"Features:\r\n\r\nSolo Werks S1 Coilover System - MKV \/ MKVI  - Premium Entry Level Coilover Suspension!\r\n\r\nHeavy gold galvanized Housings for superb corrosion resistance\r\nNew progressive elastomer bumpstops\r\nBlack spring perches - double lock ring design\r\nPlatform Specific Spring Rates and Matched Valving\r\nFront 35-65mm (1.4-2.5\") Lowering Range\r\nRear 35-70mm (1.4-2.75\") Lowering Range\r\n3 year Limited Warranty\r\nEach Kit contains:\r\n\r\n2x 55mm Front Threaded Coilover Dampers -Heavy Gold Zinc Plated with dual locking ring spring perches\r\n2x Front Spring (Progressive Rate)\r\n2x Rear Dampers\r\n2x Rear Adjustable Perches\r\n2x Rear springs (Progressive Rate)\r\nCoilover Spanner Wrenches\r\nStep by Step Installation Instructions\r\n1oz. Bottle Boeshield T-9 Lubricant\/Protectant","brand":"Solowerks","offers":[{"title":"Default Title","offer_id":44309851799716,"sku":"S1VW006","price":729.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0013\/9929\/1964\/products\/s1vw006-7-00__64666.1534638626.1280.1280.jpg?v=1680248480"},{"product_id":"solo-werks-s1-coilover-audi-vw-mk-v-vi-05-15-quattro-wagon-a3-quattro-06-14","title":"SOLO WERKS S1 COILOVER - AUDI - VW MK V-VI '05-'15 QUATTRO \u0026 WAGON (A3 QUATTRO '06-'14)","description":"Solo Werks S1 Coilover System - MK V\/VI Quattro - Premium Entry Level Coilover Suspension!\r\n\r\nFeatures:\r\n\r\nHeavy Gold Zinc Plated Housings for superb corrosion resistance\r\nNew Progressive elastomer bump stops\r\nBlack spring perches - double lock ring design\r\nPlatform Specific Spring Rates and Matched Valving\r\nFront 35-65mm (1.4-2.5\") Lowering Range\r\nRear 35-70mm (1.4-2.75\") Lowering Range)\r\n3 year Limited Warranty\r\n \r\n\r\nEach Kit Contains:\r\n\r\n2x 55mm Front Threaded Coilover Dampers -Heavy Gold Zinc Plated with dual locking ring spring perches\r\n2x Front Spring (Progressive Rate)\r\n2x Rear Dampers\r\n2x Rear Adjustable Perches\r\n2x Rear springs (Progressive Rate)\r\nCoilover Spanner Wrenches\r\nStep by Step Installation Instructions\r\n1oz. Bottle Boeshield T-9 Lubricant\/Protectant","brand":"Solowerks","offers":[{"title":"Default Title","offer_id":44309852094628,"sku":"S1VW007","price":729.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0013\/9929\/1964\/products\/s1vw006-7-00__64666.1534638626.1280.1280_1.jpg?v=1680248493"},{"product_id":"solo-werks-s1-coilover-vw-mk-vii-15-55mm-w-rear-multi-link-susp-gas-motors","title":"SOLO WERKS S1 COILOVER - VW MK VII 15+ 55MM (W- REAR MULTI-LINK SUSP) - GAS MOTORS","description":"Solo Werks S1 Coilover System - \"NEW PLATFORM\" MK VII  - Premium Entry Level Coilover Suspension!\r\n\r\nHeavy gold galvanized 55mm Housings for superb corrosion resistance\r\nNew progressive elastomer bumpstops\r\nBlack spring perches - double lock ring design\r\nPlatform Specific Spring Rates and Matched Valving\r\nFront 35-65mm (1.4-2.5\") Lowering Range\r\nRear 35-70mm (1.4-2.75\") Lowering Range\r\n3 year Limited Warranty\r\nEach Kit contains:\r\n\r\n2x 55mm Front Threaded Coilover Dampers -Heavy Gold Zinc Plated with dual locking ring spring perches\r\n2x Front Springs (Progressive Rate)\r\n2x Rear Dampers\r\n2x Rear Adjustable Perches\r\n2x Rear springs (Progressive Rate)\r\nCoilover Spanner Wrenches\r\nStep by Step Installation Instructions\r\n1oz. Bottle Boeshield T-9 Lubricant\/Protection","brand":"Solowerks","offers":[{"title":"Default Title","offer_id":44309852160164,"sku":"S1VW012","price":729.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0013\/9929\/1964\/products\/s1vw014-00__98075.1534298448.1280.1280.jpg?v=1680248508"},{"product_id":"solo-werks-s1-coilover-a4-s4-8d-b5-95-01-sedan-avant-quattro","title":"SOLO WERKS S1 COILOVER - A4-S4 (8D-B5) '95-'01 SEDAN \u0026 AVANT (QUATTRO)","description":"Solo Werks S1 Coilover - A4 (8D\/B5) 95'-01' Sedan \u0026amp; Avant (Quattro) - Premium Entry Level Coilover Suspension!\r\n\r\n \r\n\r\nLowering Ranges:\r\n\r\nFront 40-75mm(1.5-3.0\")\r\nRear 40-75mm(1.5-3.0\")\r\n \r\n\r\nFeatures:\r\n\r\nHeavy Gold Zinc Plated Housings for superb corrosion resistance\r\nProgressive rate elastomer bumpstops\r\nBlack anodized spring perches - double lock ring design\r\nPlatform Specific Progressive Spring Rates and Matched Valving\r\n3 year Limited Warranty\r\n \r\n\r\nEach Kit Contains:\r\n\r\n2x Front threaded coilover dampers (w\/ dual locking spring perches)\r\n2x Front spring + 2x helper spring\r\n2x Rear threaded coilover dampers (w\/ dual locking spring perches)\r\n4x progressive rate elastomer bumpstops\r\n2x Spanner wrenches\r\nInstallation Instruction Packet\r\n1oz. Bottle Boeshield T-9 Lubricant\/Protectant","brand":"Solowerks","offers":[{"title":"Default Title","offer_id":44309852356772,"sku":"S1AU004","price":729.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0013\/9929\/1964\/products\/s1au004-00__42800.1534637814.1280.1280.jpg?v=1680248524"},{"product_id":"solo-werks-s1-coilover-audi-a4-b6-b7-01-08-sedan-2wd-quattro","title":"SOLO WERKS S1 COILOVER - AUDI A4 (B6-B7) '01-'08 SEDAN 2WD \u0026 QUATTRO","description":"Solo Werks S1 Coilover System - A4 Sedan 2wd \u0026amp; Quattro (B6\/B7) - Premium Entry Level Coilover Suspension\r\n\r\n \r\n\r\nLowering Ranges:\r\n\r\nFront 40-80mm(1.6-3.35\")\r\nRear 40-80mm (1.6-3.35\")\r\n \r\n\r\nFeatures at a Glance:\r\n\r\n3-Year Limited Warranty\r\nWarrants against Construction and Component Defects\r\nHeavy Gold Zinc Plated Housings\r\nSuperb Corrosion Resistance, Salt Spray tested 500 Hours\r\nTwin Tube Shock Design\r\nGas Charged, Fixed Dampening, Independent Valves, App Specific Tuning\r\nHigh Tensile Chrome Silicon Wire Springs\r\nLight Weight, Less Stress, More Travel, Powdercoated\r\nHardened Chrome Piston Rods\r\nMirror Finished\r\nElastomer Bumpstops\r\nMicro Cell Poly, Progressive Rate, Long Life Span\r\nHeight Adjustable Rear Perches Dual\r\nAnodized Black Aluminum, Inc. Spanners\r\nKit Contents:\r\n\r\n2x Front threaded coilover dampers\r\n2x Front Main Spring + 2x helper spring\r\n2x Rear dampers\r\n2x Rear adjustable spring perches\r\n2x Rear springs\r\nSpanner wrenches\r\nStep by Step Installation Instructions\r\n1oz. Bottle Boeshield T-9 Lubricant\/Protection","brand":"Solowerks","offers":[{"title":"Default Title","offer_id":44309852455076,"sku":"S1AU001","price":799.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0013\/9929\/1964\/products\/mg_4290__92156.1480360855.1280.1280.jpg?v=1680248534"},{"product_id":"solo-werks-s1-coilover-audi-a4b6-b7-01-08-avant-2wd-quattro","title":"SOLO WERKS S1 COILOVER - AUDI A4(B6-B7) '01-'08 AVANT 2WD \u0026 QUATTRO","description":"Solo Werks S1 Coilover System - A4 (B6\/B7) Avant 2wd and Quattro - Premium Entry Level Coilover Suspension!\r\n\r\n \r\n\r\nLowering Ranges:\r\n\r\nFront 40-80mm(1.6-3.35\")\r\nRear 40-80mm (1.6-3.35\")\r\n \r\n\r\nFeatures:\r\n\r\nHeavy Gold Zinc Plated Housings for superb corrosion resistance\r\nProgressive elastomer bumpstops\r\nBlack spring perches - double lock ring design\r\nPlatform Specific Spring Rates and Matched Valving\r\n3 year Limited Warranty\r\n \r\n\r\nEach Kit Contains:\r\n\r\n2x Front threaded coilover dampers (w\/ dual locking spring perches)\r\n2x Front spring (Linear Rate) + 2x helper spring\r\n2x Rear dampers\r\n2x Rear adjustable spring perches\r\n2x Rear springs (Progressive Rate)\r\n2x Spanner wrenches\r\nStep by Step Installation Instructions\r\n1oz. Bottle Boeshield T-9 Lubricant\/Protectant","brand":"Solowerks","offers":[{"title":"Default Title","offer_id":44309852520612,"sku":"S1AU002","price":729.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0013\/9929\/1964\/products\/s1au004-00__14721.1534637894.1280.1280.jpg?v=1680248545"},{"product_id":"solo-werks-s1-coilover-a4-a5-s4-s5-rs5-b8-08-15-quattro-inc-avant","title":"SOLO WERKS S1 COILOVER - A4 - A5 - S4 - S5 - RS5 B8 '08-'15 QUATTRO (INC AVANT)","description":"Solo Werks S1 Coilover System - A4 (B8) Quattro \u0026amp; Avant- Premium Entry Level Coilover Suspension!\r\n\r\n \r\n\r\nLowering Ranges:\r\n\r\nFront 25-75mm(1.0-3.0\") (S4 = 0.5\"-2.5\")\r\nRear 25-75mm (1.0-3.0\") (S4 = 0.5\"-2.5\")\r\n \r\n\r\nFeatures:\r\n\r\nHeavy Gold Zinc Plated Housings for superb corrosion resistance\r\nProgressive rate elastomer bumpstop\r\nBlack anodized spring perches - double lock ring design\r\nPlatform Specific Progressive Spring Rates and Matched Valving\r\n3 year Limited Warranty\r\n \r\n\r\nEach Kit Contains:\r\n\r\n2x Front threaded coilover dampers (w\/ dual locking spring perches)\r\n2x Front spring + 2x helper spring\r\n2x Rear dampers\r\n2x Rear progressive rate elastomer bumpstops\r\n2x Rear adjustable spring perches\r\n2x Rear progressive rate spring\r\n2x Spanner wrenches\r\nInstallation Instructions\r\n1oz. Bottle Boeshield T-9 Lubricant\/Protectant","brand":"Solowerks","offers":[{"title":"Default Title","offer_id":44309852553380,"sku":"S1AU006","price":789.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0013\/9929\/1964\/products\/s1au005_6-00__57358.1534638056.1280.1280.jpg?v=1680248555"},{"product_id":"solo-werks-s1-coilover-a4-a5-b8-08-15-2wd-only","title":"SOLO WERKS S1 COILOVER - A4 - A5 B8 '08-'15 2WD ONLY","description":"Solo Werks S1 Coilover System - A4 (B8) Sedan- Premium Entry Level Coilover Suspension!\r\n\r\n \r\n\r\nLowering Ranges:\r\n\r\nFront 25-75mm(1.0-3.0\")\r\nRear 25-75mm (1.0-3.0\")\r\n \r\n\r\nFeatures:\r\n\r\nHeavy Gold Zinc Plated Housings for superb corrosion resistance\r\nProgressive rate elastomer bumpstops\r\nBlack anodized spring perches - double lock ring design\r\nPlatform Specific Progressive Spring Rates and Matched Valving\r\n3 year Limited Warranty\r\n \r\n\r\nEach Kit Contains:\r\n\r\n2x Front threaded coilover dampers (w\/ dual locking spring perches)\r\n2x Front spring + 2x helper spring\r\n2x Rear dampers\r\n2x Rear progressive rate elastomer bumpstops\r\n2x Rear adjustable spring perches\r\n2x Rear progressive rate spring\r\n2x Spanner wrenches\r\nInstallation Instructions\r\n1oz. Bottle Boeshield T-9 Lubricant\/Protectant","brand":"Solowerks","offers":[{"title":"Default Title","offer_id":44309852848292,"sku":"S1AU005","price":789.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0013\/9929\/1964\/products\/s1au005_6-00__57358.1534638056.1280.1280_1.jpg?v=1680248569"},{"product_id":"solo-werks-s1-coilover-c7-a6-4g-a7-d4-a8-8r-q5-12-15-mlb-platform","title":"SOLO WERKS S1 COILOVER - C7 A6, 4G A7, D4 A8, 8R Q5 - '12-'15 (MLB PLATFORM)","description":"Solo Werks S1 Coilover System - C7 A6,  4G A7, D4 A8, 8R Q5 -  (MLB platform)- Premium Entry Level Coilover Suspension!\r\n\r\nHeavy Gold Zinc Plated Housings for superb corrosion resistance\r\nProgressive rate elastomer bumpstops\r\n\"New\" Black anodized spring perches - double lock ring design\r\nPlatform Specific Progressive Spring Rates and Matched Valving\r\nFront 25-75mm(1.0-3.0\") Lowering Range (S models = 0.5\"-2.5\")\r\nRear 25-75mm (1.0-3.0\") Lowering Range (S models = 0.5\"-2.5\")\r\n3 year Limited Warranty\r\n \r\n\r\nEach Kit Contains:\r\n\r\n2x Front threaded coilover dampers (w\/ dual locking spring perches)\r\n2x Front spring + 2x helper spring\r\n2x Rear dampers\r\n2x \"New\" Rear progressive rate elastomer bumpstops\r\n2x Rear adjustable spring perches\r\n2x Rear progressive rate spring\r\n2x Spanner wrenches\r\nInstallation Instructions","brand":"Solowerks","offers":[{"title":"Default Title","offer_id":44309852913828,"sku":"S1AU007","price":789.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0013\/9929\/1964\/products\/img_0039__49587.1480366252.1280.1280.jpg?v=1680248580"},{"product_id":"solo-werks-s1-coilover-vw-mk-iv-99-04-wagon-2wd","title":"SOLO WERKS S1 COILOVER - VW MK4 IV '99-'04 WAGON 2WD","description":"Solo Werks S1 Coilover System - MK IV Wagon 2wd  - Premium Entry Level Coilover Suspension!\r\n\r\nFeatures:\r\n\r\nHeavy Gold Zinc Plated Housings for superb corrosion resistance\r\nNew Progressive elastomer bump stops\r\nBlack spring perches - double lock ring design\r\nPlatform Specific Spring Rates and Matched Valving\r\nFront \u0026amp; Rear 40-70mm (1.5-2.75\") Lowering Range\r\n3 year Limited Warranty\r\n \r\n\r\nEach Kit Contains:\r\n\r\n2x Front threaded coilover dampers (w\/ Dual locking ring spring perches)\r\n2x Front Spring (Linear Rate) + 2x helper spring\r\n2x Rear dampers\r\n2x Rear adjustable spring perches\r\n2x Rear springs (Progressive Rate Wagon Specific)\r\n2x Spanner wrenches\r\nStep by Step Installation Instructions\r\n1oz. Bottle Boeshield T-9 Lubricant\/Protectant","brand":"Solowerks","offers":[{"title":"Default Title","offer_id":44309852946596,"sku":"S1VW003","price":729.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0013\/9929\/1964\/products\/s1vw004-00__85045.1534638487.1280.1280.jpg?v=1680248593"},{"product_id":"solo-werks-s1-coilover-vw-mk-v-mk-vi-05-15-w-rear-torsion-beam-susp","title":"SOLO WERKS S1 COILOVER - VW MK V \u0026 MK VI '05-'15 (W- REAR TORSION BEAM SUSP)","description":"Solo Werks S1 Coilover System - MKV \/ MKVI  - Premium Entry Level Coilover Suspension!\r\n\r\nHeavy gold galvanized Housings for superb corrosion resistance\r\nNew progressive elastomer bumpstops\r\nBlack spring perches - double lock ring design\r\nPlatform Specific Spring Rates and Matched Valving\r\nFront 35-65mm (1.4-2.5\") Lowering Range\r\nRear 35-70mm (1.4-2.75\") Lowering Range\r\n3 year Limited Warranty\r\nEach Kit contains:\r\n\r\n2x 55mm Front Threaded Coilover Dampers -Heavy Gold Zinc Plated with dual locking ring spring perches\r\n2x Front Spring (Progressive Rate)\r\n2x Rear Dampers\r\n2x Rear Adjustable Perches\r\n2x Rear springs (Progressive Rate)\r\nCoilover Spanner Wrenches\r\nStep by Step Installation Instructions\r\n1oz. Bottle Boeshield T-9 Lubricant\/Protectant","brand":"Solowerks","offers":[{"title":"Default Title","offer_id":44309853044900,"sku":"S1VW010","price":729.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0013\/9929\/1964\/products\/s1vw006-7-00__23844.1534638721.1280.1280.jpg?v=1680248603"},{"product_id":"solo-werks-s1-coilover-vw-mk-ii-85-92-mk-iii-93-98-corrado-90-94-passat-2wd-88-96","title":"SOLO WERKS S1 COILOVER- VW MK II '85-'92, MK III '93-'98 \u0026 CORRADO '90-'94 - PASSAT 2WD '88-' 96","description":"Solo Werks S1 Coilover System - MK II, MK III \u0026amp; Corrado 2wd  - Premium Entry Level Coilover Suspension!\r\n\r\nFeatures:\r\n\r\nHeavy Gold Zinc Plated Housings for superb corrosion resistance\r\n\r\nBlack spring perches - double lock ring design\r\nVR6 Platform Based Spring Rates and Matched Valving\r\nFront \u0026amp; Rear 45-85mm (1.7-3.3\") Lowering Range\r\n3 year Limited Warranty\r\nFitments for all MK II, MK III \u0026amp; Corrado 2wd\r\nEach Kit Contains:\r\n\r\n2x Front threaded coilover dampers (w\/ Dual locking ring spring perches)\r\n2x Front Spring (Linear Rate) + 2x helper spring\r\n2x Rear threaded coilover dampers (w\/ Dual locking ring spring perches)\r\n2x Rear adjustable spring perches\r\n2x Rear spring + 2x helper spring (Linear Rate)\r\n2x Spanner wrenches\r\nStep by Step Installation Instructions\r\n1oz. Bottle Boeshield T-9 Lubricant\/Protection","brand":"Solowerks","offers":[{"title":"Default Title","offer_id":44309853110436,"sku":"S1VW002","price":729.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0013\/9929\/1964\/products\/s1vw002-00__14335.1534638435.1280.1280.jpg?v=1680248617"},{"product_id":"solo-werks-s1-coilover-vw-mkiv-2004-golf-r32","title":"SOLO WERKS S1 COILOVER - VW MKIV 2004 GOLF R32","description":"Solo Werks S1 Coilover System - MK IV R32   - Premium Entry Level Coilover Suspension!\r\n\r\nFeatures:\r\n\r\nHeavy Gold Zinc Plated Housings for superb corrosion resistance\r\nNew Progressive elastomer bump stops\r\nBlack spring perches - double lock ring design\r\nPlatform Specific Spring Rates and Matched Valving\r\nFront 10-40mm (.5-1.5\") Lowering Range\r\nRear 10-45mm (.5-1.75\") Lowering Range\r\n3 year Limited Warranty\r\nEach Kit Contains:\r\n\r\n2x Front threaded coilover dampers (w\/ Dual locking ring spring perches)\r\n2x Front Spring (Linear Rate) + 2x helper spring\r\n2x Rear dampers\r\n2x Rear adjustable spring perches\r\n2x Rear springs (Progressive Rate)\r\n2x Spanner wrenches\r\nStep by Step Installation Instructions\r\n1oz. Bottle Boeshield T-9 Lubricant\/Protectant","brand":"Solowerks","offers":[{"title":"Default Title","offer_id":44309853503652,"sku":"S1VW005","price":729.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0013\/9929\/1964\/products\/s1vw005-00__11009.1534638573.1280.1280.jpg?v=1680248631"},{"product_id":"solo-werks-s1-coilover-vw-mk-vii-15-50mm-w-rear-multi-link-susp-gas-motors","title":"SOLO WERKS S1 COILOVER - VW MK VII 15+ 50MM (W- REAR MULTI-LINK SUSP) - GAS MOTORS","description":"Solo Werks S1 Coilover System - \"NEW PLATFORM\" MK VII  - Premium Entry Level Coilover Suspension!\r\n\r\nHeavy gold galvanized 50mm Housings for superb corrosion resistance\r\nNew progressive elastomer bumpstops\r\nBlack spring perches - double lock ring design\r\nPlatform Specific Spring Rates and Matched Valving\r\nFront 35-65mm (1.4-2.5\") Lowering Range\r\nRear 35-70mm (1.4-2.75\") Lowering Range\r\nIncludes shortened Sway Bar End links!\r\n3 year Limited Warranty\r\nEach Kit contains:\r\n\r\n2x 50mm Front Threaded Coilover Dampers -Heavy Gold Zinc Plated with dual locking ring spring perches\r\n2x Front Springs (Progressive Rate)\r\n2x Rear Dampers\r\n2x Rear Adjustable Perches\r\n2x Rear springs (Progressive Rate)\r\nCoilover Spanner Wrenches\r\nStep by Step Installation Instructions\r\n1oz. Bottle Boeshield T-9 Lubricant\/Protection","brand":"Solowerks","offers":[{"title":"Default Title","offer_id":44309853536420,"sku":"S1VW013","price":729.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0013\/9929\/1964\/products\/s1vw014-00__41563.1534298580.1280.1280.jpg?v=1680248644"},{"product_id":"solo-werks-s1-coilover-vw-mk-vii-15-tdi-50mm-w-rear-torsion-beam-suspension","title":"SOLO WERKS S1 COILOVER - VW MK VII 15+ TDI 50MM (W- REAR TORSION BEAM SUSPENSION)","description":"Solo Werks S1 Coilover System - \"NEW PLATFORM\" MK VII  - Premium Entry Level Coilover Suspension!\r\n\r\nHeavy gold galvanized 50mm Housings for superb corrosion resistance\r\nNew progressive elastomer bumpstops\r\nBlack spring perches - double lock ring design\r\nPlatform Specific Spring Rates and Matched Valving\r\nFront 35-65mm (1.4-2.5\") Lowering Range\r\nRear 35-70mm (1.4-2.75\") Lowering Range\r\n3 year Limited Warranty\r\nEach Kit contains:\r\n\r\n2x Front Threaded Coilover Dampers -Heavy Gold Zinc Plated with dual locking ring spring perches\r\n2x Front Spring\r\n2x Rear Dampers\r\n2x Rear Adjustable Perches\r\n2x Rear springs (Progressive Rate)\r\n2x Coilover Spanner Wrenches\r\nStep by Step Installation Instructions\r\n1oz. Bottle Boeshield T-9 Lubricant\/Protection","brand":"Solowerks","offers":[{"title":"Default Title","offer_id":44309853569188,"sku":"S1VW014","price":729.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0013\/9929\/1964\/products\/s1vw014-00__50885.1534298655.1280.1280.jpg?v=1680248655"},{"product_id":"solo-werks-s1-coilover-vw-79-84-mk-i-golf-jetta-cabriolet-scirocco-i-ii","title":"SOLO WERKS S1 COILOVER- VW '79-'84 MK I GOLF - JETTA - CABRIOLET - SCIROCCO I \u0026 II","description":"Solo Werks S1 Coilover System - MK I Golf \/ Jetta \/ Cabriolet \/ Scirocco I \u0026amp; II\r\n\r\nFeatures:\r\n\r\nHeavy Gold Zinc Plated Housings for superb corrosion resistance\r\n\r\nBlack spring perches - double lock ring design\r\nSport Spring Rates and Matched Valving\r\nFront \u0026amp; Rear 40-70mm (1.6-2.8\") Lowering Range\r\n3 year Limited Warranty\r\nFitments for all MK I Golf \/ Jetta \/ Cabriolet \/ Scirocco I \u0026amp; II\r\nEach Kit Contains:\r\n\r\n2x Front threaded coilover dampers (w\/ Dual locking ring spring perches)\r\n2x Front Spring (Linear Rate) + 2x helper spring\r\n2x Rear threaded coilover dampers (w\/ Dual locking ring spring perches)\r\n2x Rear adjustable spring perches\r\n2x Rear spring + 2x helper spring (Linear Rate)\r\n2x Spanner wrenches\r\nStep by Step Installation Instructions\r\n1oz. Bottle Boeshield T-9 Lubricant\/Protection","brand":"Solowerks","offers":[{"title":"Default Title","offer_id":44309853700260,"sku":"S1VW001","price":729.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0013\/9929\/1964\/products\/s1vw001-00__50742.1534637730.1280.1280.jpg?v=1680248669"},{"product_id":"solo-werks-s1-coilover-vw-mk-vii-jetta-2019-55mm-w-rear-torsion-beam-suspension","title":"SOLO WERKS S1 COILOVER - VW MK VII JETTA 2019+ 55MM (W- REAR TORSION BEAM SUSPENSION)","description":"Solo Werks S1 Coilover System - \"NEW PLATFORM\" MK VII  - Premium Entry Level Coilover Suspension!\r\n\r\nHeavy gold galvanized 55mm Housings for superb corrosion resistance\r\nNew progressive elastomer bumpstops\r\nBlack spring perches - double lock ring design\r\nPlatform Specific Spring Rates and Matched Valving\r\nFront 35-65mm (1.4-2.5\") Lowering Range\r\nRear 35-70mm (1.4-2.75\") Lowering Range\r\n3 year Limited Warranty\r\nEach Kit contains:\r\n\r\n2x 55mm Front Threaded Coilover Dampers -Heavy Gold Zinc Plated with dual locking ring spring perches\r\n2x Front Springs (Progressive Rate)\r\n2x Rear Dampers\r\n2x Rear Adjustable Perches\r\n2x Rear springs (Progressive Rate)\r\nCoilover Spanner Wrenches\r\nStep by Step Installation Instructions\r\n1oz. Bottle Boeshield T-9 Lubricant\/Protection","brand":"Solowerks","offers":[{"title":"Default Title","offer_id":44309853733028,"sku":"S1VW016","price":729.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0013\/9929\/1964\/products\/s1vw014-00__31072.1534298707.1280.1280.jpg?v=1680248682"},{"product_id":"solo-werks-s1-coilover-vw-passat-b5-5-5-96-05-2wd","title":"SOLO WERKS S1 COILOVER - VW PASSAT B5-5.5 '96-'05 2WD","description":"Solo Werks S1 Coilover System - VW Passat B5\/5.5 2WD - Premium Entry Level Coilover Suspension!\r\n\r\nFeatures:\r\n\r\nHeavy Gold Zinc Plated Housings for superb corrosion resistance\r\nNew progressive elastomer bump stops\r\nBlack spring perches - double lock ring design\r\nPlatform Specific Spring Rates and Matched Valving\r\nFront \u0026amp; Rear 40-70mm (1.6-2.8\") Lowering Range\r\n3 year Limited Warranty\r\n \r\n\r\nEach Kit Contains:\r\n\r\n2x Front threaded coilover dampers (w\/ Dual locking ring spring perches)\r\n2x Front Spring (Progressive Rate) + 2x helper spring\r\n2x Rear dampers\r\n2x Rear adjustable spring perches\r\n2x Rear springs (Progressive Rate)\r\n2x Spanner wrenches\r\nStep by Step Installation Instructions\r\n1oz. Bottle Boeshield T-9 Lubricant\/Protection","brand":"Solowerks","offers":[{"title":"Default Title","offer_id":44309853765796,"sku":"S1VW009","price":729.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0013\/9929\/1964\/products\/mg_4410__50525.1489081073.1280.1280.jpg?v=1680248694"},{"product_id":"solo-werks-s1-coilover-bmw-3-series-e90-e92-06-13-coupe-sedan-1-series-e81-82-87-coupe-3-5-door","title":"SOLO WERKS S1 COILOVER - BMW 3 SERIES E90-E92 '06-'13 COUPE, SEDAN - 1 SERIES E81-82-87 COUPE, 3-5 DOOR","description":"Solo Werks S1 Coilover System - E90 3 Series  - Premium Entry Level Coilover Suspension!\r\n\r\nFeatures:\r\n\r\nHeavy Gold Zinc Plated Housings for superb corrosion resistance\r\nLarge 20mm Damper Shafts\r\nNew Progressive elastomer bumpstops\r\nBlack spring perches - double lock ring design\r\nPlatform Specific Spring Rates and Matched Valving\r\nFront 30-60mm(1.6-2.4\") Sedan Lowering Range\r\nRear 22-55mm (1.0-2.2\") Sedan Lowering Range\r\n3 year Limited Warranty\r\n \r\n\r\nEach Kit Contains:\r\n\r\n2x Front threaded coilover dampers (w\/ Dual locking ring spring perches)\r\n2x Front Spring\r\n2x Rear (Twin-Tube Design) dampers\r\n2x Rear adjustable spring perches\r\n2x Rear spring (Progressive Rate)\r\n2x Spanner wrenches\r\nStep by Step Installation Instructions\r\n1oz. Bottle Boeshield T-9 Lubricant\/Protection","brand":"Solowerks","offers":[{"title":"Default Title","offer_id":44309854027940,"sku":"S1BW005","price":869.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0013\/9929\/1964\/products\/s1bw005-00__28581.1534638252.1280.1280.jpg?v=1680248704"},{"product_id":"solo-werks-s1-coilover-bmw-12-17-f-series-f20-f21-f22-f30-f32-w-o-edc","title":"SOLO WERKS S1 COILOVER - BMW '12-'17 F SERIES F20 -F21 - F22 - F30 - F32 W-O EDC","description":"Solo Werks S1 Coilover System - F-Series Premium Entry Level Coilover Suspension!\r\n\r\nFeatures:\r\n\r\nHeavy Gold Zinc Plated Housings for superb corrosion resistance\r\nLarge 20mm Damper Shafts\r\nNew Progressive elastomer bumpstops\r\nBlack spring perches -\r\nPlatform Specific Spring Rates and Matched Valving\r\nFront 40-65mm(1.6-2.5\") Lowering Range\r\nRear 30-60mm (1.2\"-2.4\") Lowering Range\r\n3 year Limited Warranty\r\n \r\n\r\nEach Kit Contains:\r\n\r\n2x Front threaded coilover dampers\r\n2x Front Spring\r\n2x Rear (Twin-Tube Design) dampers\r\n2x Rear adjustable spring perches\r\n2x Rear spring (Progressive rate)\r\nSpanner wrenches\r\nStep by Step Installation Instructions\r\n1oz. Bottle Boeshield T-9 Lubricant\/Protection\r\n \r\n\r\n * A 5mm (min) front wheel spacer may be necessary depending on wheel size and offset\r\n\r\n*All lowering ranges are approx. and will varying depending on mileage, condition, vehicle options. ","brand":"Solowerks","offers":[{"title":"Default Title","offer_id":44309854159012,"sku":"S1BW010","price":929.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0013\/9929\/1964\/products\/s1bw010-00__81818.1534638314.1280.1280.jpg?v=1680248717"},{"product_id":"solo-werks-s1-coilover-bmw-3-series-e36-92-98-coupe-sedan-convertible","title":"SOLO WERKS S1 COILOVER - BMW 3 SERIES E36 '92-'98 COUPE, SEDAN, CONVERTIBLE","description":"Solo Werks S1 Coilover System - E36 3 Series  - Premium Entry Level Coilover Suspension!\r\n\r\nFeatures:\r\n\r\nHeavy Gold Zinc Plated Housings for superb corrosion resistance\r\nLarge 20mm Damper Shafts\r\nNew Progressive elastomer bumpstops\r\nBlack spring perches - double lock ring design\r\nPlatform Specific Spring Rates and Matched Valving\r\nFront 40-80mm (1.6-3.1\"\") Lowering Range\r\nRear 20-50mm (0.8-2.0\") Lowering Range\r\n3 year Limited Warranty\r\n \r\n\r\nEach Kit Contains:\r\n\r\n2x Front threaded coilover dampers (w\/ Dual locking ring spring perches)\r\n2x Front Spring (Linear Rate) + 2x helper spring\r\n2x Rear (Twin-Tube Design) dampers\r\n2x Rear adjustable spring perches\r\n2x Rear spring (Progressive rate)\r\n2x Spanner wrenches\r\nStep by Step Installation Instructions\r\n1oz. Bottle Boeshield T-9 Lubricant\/Protection","brand":"Solowerks","offers":[{"title":"Default Title","offer_id":44309854224548,"sku":"S1BW001","price":729.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0013\/9929\/1964\/products\/s1bw001-00__44942.1534638117.1280.1280.jpg?v=1680248729"},{"product_id":"s1-coilover-bmw-3-series-e36-m3-95-98-coupe-sedan-convertible","title":"S1 COILOVER - BMW 3 SERIES E36 M3 '95-'98 COUPE, SEDAN, CONVERTIBLE","description":"Solo Werks S1 Coilover System - E36 M3 3 Series  - Premium Entry Level Coilover Suspension!\r\n\r\nFeatures:\r\n\r\nHeavy Gold Zinc Plated Housings for superb corrosion resistance\r\nLarge 20mm Damper Shafts\r\nNew Progressive elastomer bumpstops\r\nBlack spring perches - double lock ring design\r\nM3 Specific Spring Rates and Matched Valving\r\nFront 30-60mm (1.6-2.3\") Lowering Range\r\nRear 20-45mm (0.8-1.75\") Lowering Range\r\n3 year Limited Warranty\r\n \r\n\r\nEach Kit Contains:\r\n\r\n2x Front threaded coilover dampers (w\/ Dual locking ring spring perches)\r\n2x Front Spring (Linear Rate) + 2x helper spring\r\n2x Sway Bar End Links\r\n2x Rear (Twin-Tube Design) dampers\r\n2x Rear adjustable spring perches\r\n2x Rear spring (Progressive rate)\r\n2x Spanner wrenches\r\nStep by Step Installation Instructions\r\n1oz. Bottle Boeshield T-9 Lubricant\/Protection","brand":"Solowerks","offers":[{"title":"Default Title","offer_id":44309854290084,"sku":"S1BW002","price":729.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0013\/9929\/1964\/products\/s1bw002-00__09311.1534638159.1280.1280.jpg?v=1680248739"},{"product_id":"solo-werks-s1-coilover-bmw-12-17-f-series-f31-f33-f34-w-o-edc","title":"SOLO WERKS S1 COILOVER - BMW '12-'17 F SERIES F31 - F33 - F34 W-O EDC","description":"Solo Werks S1 Coilover System - F-Series Premium Entry Level Coilover Suspension!\r\n\r\nFeatures:\r\n\r\nHeavy Gold Zinc Plated Housings for superb corrosion resistance\r\nLarge 20mm Damper Shafts\r\nNew Progressive elastomer bumpstops\r\nBlack spring perches -\r\nPlatform Specific Spring Rates and Matched Valving\r\nFront 40-65mm(1.6-2.5\") Lowering Range\r\nRear 30-60mm (1.2\"-2.4\") Lowering Range\r\n3 year Limited Warranty\r\n \r\n\r\nEach Kit Contains:\r\n\r\n2x Front threaded coilover dampers\r\n2x Front Spring\r\n2x Rear (Twin-Tube Design) dampers\r\n2x Rear adjustable spring perches\r\n2x Rear spring (Progressive rate)\r\nSpanner wrenches\r\nStep by Step Installation Instructions\r\n1oz. Bottle Boeshield T-9 Lubricant\/Protection\r\n \r\n\r\n * A 5mm (min) front wheel spacer may be necessary depending on wheel size and offset\r\n\r\n*All lowering ranges are approx. and will varying depending on mileage, condition, vehicle options. ","brand":"Solowerks","offers":[{"title":"Default Title","offer_id":44309854355620,"sku":"S1BW020","price":929.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0013\/9929\/1964\/products\/s1bw010-00__15096.1534638356.1280.1280.jpg?v=1680248750"},{"product_id":"solo-werks-s1-coilover-bmw-5-series-e61-04-10-wagon-non-m","title":"SOLO WERKS S1 COILOVER - BMW 5 SERIES E61 '04-'10 WAGON (NON M)","description":"Solo Werks S1 Coilover System - E61 5 Series Wagon  - Premium Entry Level Coilover Suspension!\r\n\r\nFeatures:\r\n\r\nHeavy Gold Zinc Plated Housings for superb corrosion resistance\r\nLarge 20mm Damper Shafts\r\nNew Progressive elastomer bumpstops\r\nBlack spring perches - double lock ring design\r\nPlatform Specific Spring Rates and Matched Valving\r\nFront 25-45mm(1.0-2.2\") Lowering Range\r\nRear 25-45mm(1.0-2.2\") Lowering Range\r\n3 year Limited Warranty\r\n \r\n\r\nEach Kit Contains:\r\n\r\n2x Front threaded coilover dampers (w\/ Dual locking ring spring perches)\r\n2x Front Spring (Linear Rate) + 2x helper spring\r\n2x Rear threaded air bag links\r\n2x Rear Sport Shocks\r\n2x Spanner wrenches\r\nStep by Step Installation Instructions\r\n1oz. Bottle Boeshield T-9 Lubricant\/Protection\r\n \r\n\r\n * A 5mm (min) front wheel spacer may be necessary depending on wheel size and offset","brand":"Solowerks","offers":[{"title":"Default Title","offer_id":44309854781604,"sku":"S1BW104","price":729.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0013\/9929\/1964\/products\/s1bw104-00__65202.1534288888.1280.1280.jpg?v=1680248765"},{"product_id":"solo-werks-s1-coilover-bmw-5-series-e39-97-03-sedan-non-m","title":"SOLO WERKS S1 COILOVER - BMW 5 SERIES E39 '97-'03 SEDAN (NON M)","description":"Solo Werks S1 Coilover System - E39 5 Series  - Premium Entry Level Coilover Suspension!\r\n\r\nFeatures:\r\n\r\nHeavy Gold Zinc Plated Housings for superb corrosion resistance\r\nLarge 20mm Damper Shafts\r\nNew Progressive elastomer bumpstops\r\nBlack spring perches - double lock ring design\r\nPlatform Specific Spring Rates and Matched Valving\r\nFront 40-80mm(1.6-3.1\"\") Lowering Range\r\nRear 20-50mm (0.8-2.0\") Lowering Range\r\n3 year Limited Warranty\r\n \r\n\r\nEach Kit Contains:\r\n\r\n2x Front threaded coilover dampers (w\/ Dual locking ring spring perches)\r\n2x Front Spring (Linear Rate) + 2x helper spring\r\n2x Rear threaded coilover dampers (w\/ Dual locking ring spring perches)\r\n2x Rear Spring (Linear Rate) + 2x helper spring\r\n2x Spanner wrenches\r\nStep by Step Installation Instructions\r\n1oz. Bottle Boeshield T-9 Lubricant\/Protection\r\n \r\n\r\n * A 5mm (min) front wheel spacer may be necessary depending on wheel size and offset","brand":"Solowerks","offers":[{"title":"Default Title","offer_id":44309854847140,"sku":"S1BW101","price":729.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0013\/9929\/1964\/products\/img_4423__95602.1498003646.1280.1280.jpg?v=1680248777"},{"product_id":"solo-werks-s1-coilover-bmw-5-series-e60-04-10-sedan-non-m","title":"SOLO WERKS S1 COILOVER - BMW 5 SERIES E60 '04-'10 SEDAN (NON M)","description":"Solo Werks S1 Coilover System - E61 5 Series Wagon  - Premium Entry Level Coilover Suspension!\r\n\r\nFeatures:\r\n\r\nHeavy Gold Zinc Plated Housings for superb corrosion resistance\r\nLarge 20mm Damper Shafts\r\nNew Progressive elastomer bumpstops\r\nBlack spring perches - double lock ring design\r\nPlatform Specific Spring Rates and Matched Valving\r\nFront 25-45mm(1.0-2.2\") Lowering Range\r\nRear 25-45mm(1.0-2.2\") Lowering Range\r\n3 year Limited Warranty\r\n \r\n\r\nEach Kit Contains:\r\n\r\n2x Front threaded coilover dampers (w\/ Dual locking ring spring perches)\r\n2x Front Spring (Linear Rate) + 2x helper spring\r\n2x Rear threaded air bag links\r\n2x Rear Sport Shocks\r\n2x Spanner wrenches\r\nStep by Step Installation Instructions\r\n1oz. Bottle Boeshield T-9 Lubricant\/Protection\r\n \r\n\r\n * A 5mm (min) front wheel spacer may be necessary depending on wheel size and offset","brand":"Solowerks","offers":[{"title":"Default Title","offer_id":44309854945444,"sku":"S1BW103","price":729.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0013\/9929\/1964\/products\/img_4425__18706.1498003733.1280.1280.jpg?v=1680248788"},{"product_id":"bms-differential-support-bracket-brace-for-bmw-135i-and-e9x-335i","title":"BMS Differential Support Bracket Brace for BMW 135i and E9x 335i","description":"\u003cp\u003eThe BMS brace attaches the rear differential to the subframe allowing better launches, less wheel hop, and a more stable feeling rear chassis. Our unique one piece construction eliminates welding weak points common on other similar units. \u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0013\/9929\/1964\/t\/18\/assets\/BMS_Logo_Color_400px_medium.pngv1558684142?v=1680254828\" alt=\"BMW 135 335 Diff Brace\"\u003e\u003c\/p\u003e\r\n\u003ch3\u003eFEATURES AND BENEFITS\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eTightens chassis\u003c\/li\u003e\r\n\u003cli\u003eReduces wheel hop\u003c\/li\u003e\r\n\u003cli\u003eReduces differential bearing Load\u003c\/li\u003e\r\n\u003cli\u003eStainless steel hardware included\u003c\/li\u003e\r\n\u003cli\u003ePrecision made one piece design for a perfect fit\u003c\/li\u003e\r\n\u003cli\u003eHeavy-gauge steel construction for maximum strength and durability\u003c\/li\u003e\r\n\u003cli\u003eEasy install\u003c\/li\u003e\r\n\u003cli\u003eMade in USA\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3\u003eAPPLICATIONS\u003c\/h3\u003e\r\n\u003cp\u003eATTENTION! SOME YEARS AND MODELS COME WITH EITHER A SMALL OR LARGE DIFFERENTIAL. CHECK BEFORE ORDERING\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBMW 135i Fitment\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• All 135 Manual Transmission (large diff brace)\u003cbr\u003e• All 135 Automatic Transmission (small diff brace) \u003cbr\u003e• All 135 DCT Transmission (large diff brace)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBMW 335i, 335ix, and 335d Fitment\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• All 335 Manual Transmission (large diff brace)\u003cbr\u003e• August 2006-Aug 2007 335i 335ix Auto Transmission (large diff brace)\u003cbr\u003e• Sep 2007+ 335i Auto Transmission (small diff brace) \u003cbr\u003e• All 335d (large diff brace) \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBMW 335is Fitment\u003c\/strong\u003e\u003cbr\u003e• All 335is Manual Transmission (large diff brace) \u003cbr\u003e• All 335is DCT Transmission (large diff brace)\u003c\/p\u003e\r\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0013\/9929\/1964\/t\/18\/assets\/bmw_diff_brace_135_335.jpgv1546546236?v=1680255313\" alt=\"\"\u003e\u003c\/p\u003e","brand":"Burger Motorsports","offers":[{"title":"Large Differential (Check before ordering)","offer_id":44309977727140,"sku":"small diff\/large diff","price":139.99,"currency_code":"CAD","in_stock":true},{"title":"Small Differential (Check before ordering)","offer_id":44309977759908,"sku":"small diff\/large diff","price":139.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0013\/9929\/1964\/products\/screen_shot_2018-11-21_at_5.00.45_pm_900x_2a18cf9c-99ae-41b0-9db8-c7279a2bb060.png?v=1680255311"},{"product_id":"coilover-lift-kit","title":"COILOVER LIFT KIT","description":"\u003cp\u003eHave a favorite set of coilovers on your car, but wish you had the ride height adjustability of an air suspension setup? Well look no further! Our Coilover Lift Kit installs on top of your coilover in place of your original spring hat, without adding any stack height. That's right... our lifts add ZERO height to your coilover when they're deflated!\u003cbr\u003e\u003cbr\u003eAiring up the HYBRIDair lifts will allow you to achieve an extra 2\"-5\" of ride height. Unlike 'air cup' style lifts, you can drive with pressure in the system as much as you like, taking advantage of the adjustability whenever you need it.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eAdds zero additional height to your coilover at 0 psi\u003c\/li\u003e\r\n\u003cli\u003eDrive low at your normal coilover spring rate\u003c\/li\u003e\r\n\u003cli\u003eAdjust ride height while driving\u003c\/li\u003e\r\n\u003cli\u003eDrive with air in the system or completely aired out\u003c\/li\u003e\r\n\u003cli\u003e2\"-5\" max. lift (depending on suspension geometry)\u003c\/li\u003e\r\n\u003cli\u003eRetain your original coilovers\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Hybrid Air","offers":[{"title":"Yes \/ Straight \/ No - I already have Air Management Kit","offer_id":44309994700964,"sku":"HybridAirCoiloverLiftKit","price":1200.0,"currency_code":"CAD","in_stock":true},{"title":"Yes \/ Straight \/ Yes - I need Hideaway Air Management Kit","offer_id":44309994733732,"sku":"HybridAirCoiloverLiftKit","price":2000.0,"currency_code":"CAD","in_stock":true},{"title":"Yes \/ Tapered \/ No - I already have Air Management Kit","offer_id":44309994766500,"sku":"HybridAirCoiloverLiftKit","price":1200.0,"currency_code":"CAD","in_stock":true},{"title":"Yes \/ Tapered \/ Yes - I need Hideaway Air Management Kit","offer_id":44309994799268,"sku":"HybridAirCoiloverLiftKit","price":2000.0,"currency_code":"CAD","in_stock":true},{"title":"Yes \/ Barrel \/ No - I already have Air Management Kit","offer_id":44309994832036,"sku":"HybridAirCoiloverLiftKit","price":1200.0,"currency_code":"CAD","in_stock":true},{"title":"Yes \/ Barrel \/ Yes - I need Hideaway Air Management Kit","offer_id":44309994864804,"sku":"HybridAirCoiloverLiftKit","price":2000.0,"currency_code":"CAD","in_stock":true},{"title":"No \/ Straight \/ No - I already have Air Management Kit","offer_id":44309994897572,"sku":"HybridAirCoiloverLiftKit","price":1200.0,"currency_code":"CAD","in_stock":true},{"title":"No \/ Straight \/ Yes - I need Hideaway Air Management Kit","offer_id":44309994930340,"sku":"HybridAirCoiloverLiftKit","price":2000.0,"currency_code":"CAD","in_stock":true},{"title":"No \/ Tapered \/ No - I already have Air Management Kit","offer_id":44309994963108,"sku":"HybridAirCoiloverLiftKit","price":1200.0,"currency_code":"CAD","in_stock":true},{"title":"No \/ Tapered \/ Yes - I need Hideaway Air Management Kit","offer_id":44309994995876,"sku":"HybridAirCoiloverLiftKit","price":2000.0,"currency_code":"CAD","in_stock":true},{"title":"No \/ Barrel \/ No - I already have Air Management Kit","offer_id":44309995028644,"sku":"HybridAirCoiloverLiftKit","price":1200.0,"currency_code":"CAD","in_stock":true},{"title":"No \/ Barrel \/ Yes - I need Hideaway Air Management Kit","offer_id":44309995061412,"sku":"HybridAirCoiloverLiftKit","price":2000.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0013\/9929\/1964\/products\/ha1.jpg?v=1680256518"},{"product_id":"hideaway-air-management-kit","title":"HIDEAWAY AIR MANAGEMENT KIT","description":"\u003cdiv\u003e\u003cem\u003e\u003cstrong\u003e *FINAL SALE*\u003c\/strong\u003e\u003c\/em\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe unique design of HYBRIDair coilover lifts allow for up to 5\" of ride height lift, while requiring only a fraction of the air a traditional air ride system would need to accomplish the same task. This provided the opportunity for our management kit to be compact \u0026amp; simplified, allowing you to easily tuck it away where it fits best, potentially even hiding it altogether. Thus, \u003cem\u003eThe Hideaway\u003c\/em\u003ewas born.\u003cbr\u003e\u003cbr\u003eWhile the dimensions have been kept small, it packs a serious punch! Filling from min to max pressure in \u003cstrong\u003eunder 9 seconds\u003c\/strong\u003e means you will rarely have to listen to compressor buzz. Components come pre-mounted to a wooden board to make for a simple install.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eVIAIR 400C air compressor\u003c\/li\u003e\n\u003cli\u003eVIAIR 1.0 GA tank\u003c\/li\u003e\n\u003cli\u003e3 position momentary adjustment switch\u003c\/li\u003e\n\u003cli\u003eDual path electric valve manifold\u003c\/li\u003e\n\u003cli\u003eSMC DOT fittings\u003c\/li\u003e\n\u003cli\u003e50' 1\/4\" DOT air line\u003c\/li\u003e\n\u003cli\u003e40A relay\u003c\/li\u003e\n\u003cli\u003e25A fuse, fuse holder\u003c\/li\u003e\n\u003cli\u003eComprehensive wiring and accessory pack including thread sealant and air line cutter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Hybrid Air","offers":[{"title":"Default Title","offer_id":44309995225252,"sku":"HideawayAirManagementKit","price":800.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0013\/9929\/1964\/products\/s996159019766683531_p6_i20_w2000.jpg?v=1680256538"},{"product_id":"hideaway-nano-air-management-kit","title":"HIDEAWAY NANO AIR MANAGEMENT KIT","description":"\u003cp\u003eAlthough our standard Hideaway air management kit is already quite compact, some vehicles simply have no room to spare. Speaking of spare, our Hideaway Nano kit is small enough to live inside of a Porsche 964 spare tire! Its 1\/4 gallon charge tank is big enough to ensure instant response when you hit the switch, which is incredibly important when unexpected obstacles enter your path. For vehicles heavier than 3200lbs (1450kg), we suggest adding a second tank to ensure a full lift from the air reserves. The compact VIAIR compressor might be small, but it's more than up to the task of refilling the charge tank(s).\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eViair 98C compact compressor\u003c\/li\u003e\r\n\u003cli\u003e0.25 GA charge tank\u003c\/li\u003e\r\n\u003cli\u003e3 position momentary adjustment switch\u003c\/li\u003e\r\n\u003cli\u003eDual path electric valve manifold\u003c\/li\u003e\r\n\u003cli\u003eSMC DOT fittings\u003c\/li\u003e\r\n\u003cli\u003e40' 1\/4\" DOT air line\u003c\/li\u003e\r\n\u003cli\u003e40A relay\u003c\/li\u003e\r\n\u003cli\u003e25A fuse \u0026amp; fuse holder\u003c\/li\u003e\r\n\u003cli\u003eComprehensive wiring and accessory pack including thread sealant and air line cutter\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Hybrid Air","offers":[{"title":"Default Title","offer_id":44309995290788,"sku":"HideawayNanoAirManagementKit","price":550.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0013\/9929\/1964\/products\/s996159019766683531_p3_i13_w1400.png?v=1680256548"},{"product_id":"emmotion-audi-a3-s3-8v-lowering-spring-kit","title":"eMMOTION Audi A3-S3 8V Lowering Spring Kit","description":"\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eAre you looking to lower your 8V A3 or S3, but are concerned with diminished ride quality? Designed with the daily driver in mind, eMMOTION lowering springs by Emmanuele Design will provide the improved aesthetics of a lowered vehicle, without creating the harsh, bouncy ride that is all too common with typical lowering springs.\u003c\/p\u003e\r\n\u003cp\u003eTaking our experience on the MQB platform, along with testing on our in-house S3 and MK7 GTI, we have developed what we feel is the best lowering spring option for those wishing to utilize factory dampers. Using a linear design (similar to OEM) with unique spring rates, our lowering springs are properly matched to the factory dampers, ensuring a ride quality that is slightly stiffer than stock, but predictable in nature. \u003c\/p\u003e\r\n\u003cp\u003eEach spring set is 100% made in the USA exclusively for Emmanuele Design. The springs are made of high tensile chrome silicon and each unit is shot peened, pre-set and 100% tested to ensure all the critical dimensions and rate\/loads are within tolerance. The springs are then zinc coated for corrosion resistance and finished in a gloss black powdercoat for an OEM appearance. The use of high tensile chrome silicon, as opposed to typical commercial grade chrome silicon, allows us to create a lighter spring that can sustain repeated deflection without deformation. High tensile chrome silicone will typically have thinner coil diameters that are spaced further apart, when compared to commercial chrome silicon.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eLowering Specs:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eAudi S3 (With Magnetic Ride): Approximately 0.5\" Front \u0026amp; Rear \u003c\/p\u003e\r\n\u003cp\u003eAudi S3 (Without Magnetic Ride): Approximately 0.75\" Front \u0026amp; Rear \u003c\/p\u003e\r\n\u003cp\u003eAudi A3 (Without Sport Package): Approximately 1.75\" Front \u0026amp; Rear\u003c\/p\u003e","brand":"EMD Auto","offers":[{"title":"Default Title","offer_id":44310033531044,"sku":"eMMOTIONAudiA3\/S38VLoweringSpringKit","price":374.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0013\/9929\/1964\/products\/31424494513_0e0b1530a4_k_large_19ef1851-07ce-4ddb-b04c-2471261782b3.jpg?v=1680257578"},{"product_id":"emd-mqb-rear-suspension-reverse-rake-adapter-pad","title":"EMD MQB Rear Suspension \"Reverse Rake\" Adapter Pad","description":"\u003cp\u003eIf your MQB lowering springs (or even stock springs) exhibit reverse rake, this simple solution is for you! Machined from tough ABS plastic, this piece sits between the OEM rubber pad and the body. When installed, this pad will raise the rear fender by approximately 13\/32\".\u003c\/p\u003e\r\n\u003cp\u003eThis is the same pad that is included with our S3 and Golf R lowering springs. Compatibility for all VW\/Audi MQB cars including:\u003c\/p\u003e\r\n\u003cp\u003e- MK7 Golf\u003c\/p\u003e\r\n\u003cp\u003e- MK7 GTI\u003c\/p\u003e\r\n\u003cp\u003e- MK7 Golf R\u003c\/p\u003e\r\n\u003cp\u003e- 8V A3\u003c\/p\u003e\r\n\u003cp\u003e- 8V S3\u003c\/p\u003e\r\n\u003cp\u003eSold in pairs.\u003c\/p\u003e","brand":"EMD Auto","offers":[{"title":"Default Title","offer_id":44310033825956,"sku":"EMDMQBRearSuspension\"Reverse Rake\"AdapterPad","price":49.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0013\/9929\/1964\/products\/27232681253_a740fbaded_k_large_1d73cf35-f418-4e0b-b5e1-64c53216e89a.jpg?v=1680257627"},{"product_id":"emmotion-audi-rs3-8v-2017-linear-lowering-spring-kit","title":"eMMOTION Audi RS3 (8V) 2017+ Linear Lowering Spring Kit","description":"\u003cp\u003eAfter much anticipation, we are pleased to release our lowering spring kit for the 2017+ Audi RS3 (8V) sedan. With the success of our 8V S3 spring, we have been eager to apply our experience to the RS3 platform. Similar to our other spring offerings, we went into the development process with a goal of maintaining OE ride quality and characteristics, while offering an aesthetically pleasing and functional drop. After testing multiple revisions on our in-house RS3, we feel that we have met and exceeded this goal.\u003c\/p\u003e\r\n\u003cp\u003eWe specifically opted for a linear spring design (similar to OEM), as in our experience, this pairs very well with the stock dampers. For those who've had a poor experience in the past with lowering springs feeling bouncy, crashy and all around poor in terms of ride, we feel that our lowering springs will be a welcome improvement.\u003c\/p\u003e\r\n\u003cp\u003eEach spring set is 100% made in the USA exclusively for EMD Auto. The springs are made of high tensile chrome silicon and each unit is shot peened, pre-set and 100% tested to ensure all the critical dimensions and rate\/loads are within tolerance. The springs are then zinc primered for corrosion resistance and finished in a gloss black powder coat for a factory appearance. \u003c\/p\u003e","brand":"EMD Auto","offers":[{"title":"Default Title","offer_id":44310033924260,"sku":"eMMOTIONAudiRS3(8V)2017+LinearLoweringSpringKit","price":449.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0013\/9929\/1964\/products\/sb2a3341_large_de1c5f33-aa4a-4501-bbde-851b479ef057.jpg?v=1680257646"},{"product_id":"emd-audi-a3-s3-rs3-8v-adjustable-rear-sway-bar-end-link-set-with-dust-boots","title":"EMD Audi A3-S3-RS3 8V Adjustable Rear Sway Bar End Link Set (With Dust Boots)","description":"\u003cp\u003e\u003cstrong\u003eHigher quality end links are a must when upgrading to a stiffer sway bar!\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eOur end links serve two primary purposes:\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e- Steel body will not flex or break under the load of a stiff sway bar\u003c\/em\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e- Adjustable length allows for removal of pre-load on the bar\u003c\/em\u003e\u003c\/p\u003e\r\n\u003cp\u003eFeatures include:\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eUS Made FK Rod Ends \u003c\/strong\u003e- Our end links use only the highest quality FK rod ends. What this means to you is our end links will take repeated abuse and track time without developing play in the bearing. The rod end also features a teflon liner, which keeps dirt and contaminants out of the bearing. Do not assume that all rod ends are created equal. One of the primary cost drivers for end links is in the rod ends, and we use only the best available. \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eStainless Misalignment Spacers\u003c\/strong\u003e - Custom stainless steel misalignment spacers allow more range of motion for the rod end. This allows for full movement without noise or binding.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eAdjustable Length \u003c\/strong\u003e- With non-adjustable end links, the sway bar can become \"loaded\", causing uneven ride height height and improper balance between each wheel.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eDust Boots \u003c\/strong\u003e- While the teflon lined bearings already resist contaminants, we add an extra layer of protection with the included dust boots. The function of dust boots is to seal the rod end, ensuring that no dust or road grime can get into the bearing and cause it to wear prematurely. With our included dust boots, you can rest assured that your end links are suitable for even the harshest of environments.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cem\u003ePlease note that the stock hardware (M8 bolt \u0026amp; nut, M10 nut) are reused from the OEM end link.\u003c\/em\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eOne order includes (2) end links, the required amount to replace both stock rear end links.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"EMD Auto","offers":[{"title":"Default Title","offer_id":44310033989796,"sku":"EMDAudiA3\/S3\/RS38VAdjustableRearSwayBarEndLinkSet(WithDustBoots)","price":249.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0013\/9929\/1964\/products\/sb2a3325_ab1_large_4490c7bb-a4c0-43ca-a00d-e9a3fe2acfd2.jpg?v=1680257657"},{"product_id":"emmotion-audi-a3-s3-rs3-8v-tt-rs-8s-rear-sway-bar-upgrade","title":"eMMOTION Audi A3-S3-RS3 (8V) \u0026 TT-RS (8S) Rear Sway Bar Upgrade","description":"\u003cp\u003eFor those looking for the next step in improved handling, we are pleased to release our rear sway bar upgrade for the Audi A3\/S3\/RS3 (8V) \u0026amp; TTRS (8S). Designed around a package with our lowering spring kit, the rear sway bar upgrade will reduce body roll to create a more neutral steering balance. This sway bar upgrade is specifically designed to function with the OEM front sway bar, getting rid of the factory under-steer while allowing enough compliance for a comfortable ride and predictable suspension behavior.\u003c\/p\u003e\r\n\u003cp\u003eFor the ultimate performance, we opted for a 3-position adjustable bar. The three settings offer a stiffness increase from 56% to 113%! \u003cstrong\u003ePlease note that when using the stock end links it is recommended to use the middle hole, to maintain proper suspension geometry. To use the outside holes, a spherical end link is recommended as the geometry will place added stress on the fixed factory link.\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0013\/9929\/1964\/t\/18\/assets\/holes_grande.jpgv1530221775?v=1680257668\" alt=\"\"\u003e\u003c\/p\u003e","brand":"EMD Auto","offers":[{"title":"No","offer_id":44310034055332,"sku":"eMMOTIONAudiA3\/S3\/RS3(8V)\u0026TT-RS(8S)RearSwayBarUpgrade","price":379.99,"currency_code":"CAD","in_stock":true},{"title":"Yes - Add Rear End Links","offer_id":44310034088100,"sku":"eMMOTIONAudiA3\/S3\/RS3(8V)\u0026TT-RS(8S)RearSwayBarUpgrade","price":624.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0013\/9929\/1964\/products\/sb2a3416_large_09bd5c1b-6f2b-4de6-ad12-0f200c2f6e8b.jpg?v=1680257666"},{"product_id":"emmotion-audi-a3-s3-8v-stage-1-suspension-package","title":"eMMOTION Audi A3 - S3 (8V) Stage 1 Suspension Package","description":"\u003cp\u003eStart off your suspension upgrades on the right foot with our stage 1 suspension package. This package is centered around our recommended starting point for improved handling and performance:\u003c\/p\u003e\r\n\u003cp\u003e- eMMOTION lowering spring kit\u003c\/p\u003e\r\n\u003cp\u003e- eMMOTION rear sway bar upgrade\u003c\/p\u003e\r\n\u003cp\u003eBy purchasing as a package, you save money versus buying individually. This package will fit:\u003c\/p\u003e\r\n\u003cp\u003e- 2015+ Audi A3 Quattro\u003c\/p\u003e\r\n\u003cp\u003e- 2015+ Audi S3\u003c\/p\u003e","brand":"EMD Auto","offers":[{"title":"Default Title","offer_id":44310034284708,"sku":"eMMOTIONAudiA3\/S3(8V)Stage1SuspensionPackage","price":779.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0013\/9929\/1964\/products\/stage1_r_s3_large_7b4f43a5-6923-4a51-860f-c2223053f446.jpg?v=1680257677"},{"product_id":"emmotion-audi-a3-s3-8v-stage-2-suspension-package","title":"eMMOTION Audi A3 - S3 (8V) Stage 2 Suspension Package","description":"\u003cp\u003eStart off your suspension upgrades on the right foot with our stage 2 suspension package. This package is centered around our recommended starting point for improved handling and performance:\u003c\/p\u003e\r\n\u003cp\u003e- eMMOTION lowering spring kit\u003c\/p\u003e\r\n\u003cp\u003e- eMMOTION rear sway bar upgrade\u003c\/p\u003e\r\n\u003cp\u003e- EMD Auto adjustable rear end links\u003c\/p\u003e\r\n\u003cp\u003eBy purchasing as a package, you save money versus buying individually. This package will fit:\u003c\/p\u003e\r\n\u003cp\u003e- 2015+ Audi A3 Quattro\u003c\/p\u003e\r\n\u003cp\u003e- 2015+ Audi S3\u003c\/p\u003e","brand":"EMD Auto","offers":[{"title":"Default Title","offer_id":44310034317476,"sku":"eMMOTIONAudiA3\/S3(8V)Stage2SuspensionPackage","price":1019.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0013\/9929\/1964\/products\/stage2_r_s3_large_6c6d13d7-5339-4f95-b50f-22d94ad806b2.jpg?v=1680257684"},{"product_id":"emmotion-audi-rs3-8v-stage-2-suspension-package","title":"eMMOTION Audi RS3 (8V) Stage 2 Suspension Package","description":"\u003cp\u003eStart off your suspension upgrades on the right foot with our stage 2 suspension package. For those looking for the ultimate daily driver and weekend track setup, this package is for you. Includes:\u003c\/p\u003e\r\n\u003cp\u003e- eMMOTION lowering spring kit\u003c\/p\u003e\r\n\u003cp\u003e- eMMOTION rear sway bar upgrade\u003c\/p\u003e\r\n\u003cp\u003e- EMD Auto adjustable rear end links\u003c\/p\u003e\r\n\u003cp\u003eBy purchasing as a package, you save money versus buying individually. This package will fit:\u003c\/p\u003e\r\n\u003cp\u003e- 2017+ Audi RS3\u003c\/p\u003e","brand":"EMD Auto","offers":[{"title":"Default Title","offer_id":44310034874532,"sku":"eMMOTIONAudiRS3(8V)Stage2SuspensionPackage","price":1019.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0013\/9929\/1964\/products\/sb2a3416_large_e2dddd3d-3f7e-4d7f-93ac-270b2524feed.jpg?v=1680257700"},{"product_id":"emd-audi-a3-s3-8v-adjustable-front-sway-bar-end-link-set-with-dust-boots","title":"EMD Audi A3-S3 8V Adjustable Front Sway Bar End Link Set (With Dust Boots)","description":"\u003cp\u003e\u003cstrong\u003eHigher quality end links are a must when upgrading to a stiffer sway bar!\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eOur end links serve two primary purposes:\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e- Spherical bearings remove deflection and movement\u003c\/em\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e- Adjustable length allows for removal of pre-load on the bar\u003c\/em\u003e\u003c\/p\u003e\r\n\u003cp\u003eFeatures include:\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eUS Made FK Rod Ends \u003c\/strong\u003e- Our end links use only the highest quality FK rod ends. By using an oversize M14 rod end, static load rating is over 70,000 N. What this means to you is our end links will take repeated abuse and track time without developing play in the bearing. The rod end also features a teflon liner, which keeps dirt and contaminants out of the bearing. Do not assume that all rod ends are created equal. One of the primary cost drivers for end links is in the rod ends, and we use only the best available. \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eCNC Machined Aluminum Bodies\u003c\/strong\u003e -\u003cem\u003e \u003c\/em\u003eAluminum bodies are strong and lightweight, resisting deflection under repeated high stress driving.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eStainless Misalignment Spacers\u003c\/strong\u003e - Custom stainless steel misalignment spacers allow more range of motion for the rod end. This allows for full movement without noise or binding.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eAdjustable Length \u003c\/strong\u003e- 1.5\" of length adjustment allows you to remove any pre-load on the sway bar. With non-adjustable end links, the sway bar can become \"loaded\", causing uneven ride height height and improper balance between each wheel.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eDust Boots \u003c\/strong\u003e- While the teflon lined bearings already resist contaminants, we add an extra layer of protection with the included dust boots. The function of dust boots is to seal the rod end, ensuring that no dust or road grime can get into the bearing and cause it to wear prematurely. With our included dust boots, you can rest assured that your end links are suitable for even the harshest of environments.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eHigh Quality Hardware \u003c\/strong\u003e- Mounting hardware is included with each end link set. We include class 12.9 corrosion-resistant alloy bolts, along with military-spec jet nuts. Jet nuts utilize an elliptically deformed thread to prevent backing off, ensuring that proper torque is maintained even under extreme load.\u003c\/p\u003e","brand":"EMD Auto","offers":[{"title":"Default Title","offer_id":44310034972836,"sku":"EMDAudiA3\/S38VAdjustableFrontSwayBarEndLinkSet(WithDustBoots)","price":349.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0013\/9929\/1964\/products\/untitled-1_large_3560a44d-28ab-4310-a7b2-c295507c77d5.jpg?v=1680257715"},{"product_id":"emmotion-audi-rs3-8v-stage-1-suspension-package","title":"eMMOTION Audi RS3 (8V) Stage 1 Suspension Package","description":"\u003cp\u003eStart off your suspension upgrades on the right foot with our stage 1 suspension package. This package is centered around our recommended starting point for improved handling and performance:\u003c\/p\u003e\r\n\u003cp\u003e- eMMOTION lowering spring kit\u003c\/p\u003e\r\n\u003cp\u003e- eMMOTION rear sway bar upgrade\u003c\/p\u003e\r\n\u003cp\u003eBy purchasing as a package, you save money versus buying individually. This package will fit:\u003c\/p\u003e\r\n\u003cp\u003e- 2017+ Audi RS3\u003c\/p\u003e","brand":"EMD Auto","offers":[{"title":"Default Title","offer_id":44310035005604,"sku":"eMMOTIONAudiRS3(8V)Stage1SuspensionPackage","price":699.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0013\/9929\/1964\/products\/sb2a3416_large_d6a94dc3-5ab9-4b01-9205-4cdbc2de31d0.jpg?v=1680257723"},{"product_id":"emmotion-2017-audi-a4-s4-b9-linear-lowering-spring-kit","title":"eMMOTION 2017+ Audi A4-S4 (B9) Linear Lowering Spring Kit","description":"\u003cp\u003eAfter our longest development cycle to date, we are pleased to release our lowering springs for the B9 A4\/S4 platform. Through months of testing and thousands of miles logged, we have created what we feel is the best lowering spring option for daily driven vehicles. As with any of our lowering spring options, the goal with our B9 lowering springs is to keep ride quality as close to stock as possible, while adding an OEM+ level of drop. \u003c\/p\u003e\r\n\u003cp\u003eHaving a B9 in our development fleet allowed us to spend a lot of seat time in the vehicle. This was especially advantageous in our development process, as we were able to log many miles over various surfaces and road imperfections. We felt that the car offered a very comfortable ride in stock form, and this was something that we did not want to sacrifice. With our lowering springs, we feel that we have found the balance between adding some sportiness while still keeping the ride quality that you expect from a premium Audi. \u003c\/p\u003e\r\n\u003cp\u003eEach spring set is 100% made in the USA exclusively for Emmanuele Design. The springs are made of high tensile chrome silicon and each unit is shot peened, pre-set and 100% tested to ensure all the critical dimensions and rate\/loads are within tolerance. Each spring is zinc primered for increased corrosion resistance, then powder coated with a gloss black finish for an OEM appearance. The use of high tensile chrome silicon, as opposed to typical commercial grade chrome silicon, allows us to create a lighter spring that can sustain repeated deflection without deformation. High tensile chrome silicone will typically have thinner coil diameters that are spaced further apart, when compared to commercial chrome silicon.\u003c\/p\u003e","brand":"EMD Auto","offers":[{"title":"Default Title","offer_id":44310035955876,"sku":"eMMOTION2017+AudiA4\/S4(B9)LinearLoweringSpringKit","price":374.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0013\/9929\/1964\/products\/sb2a3068-2_large_d0cec81d-c1fd-4a56-a34e-7740106aab03.jpg?v=1680257768"},{"product_id":"emmotion-audi-a4-quattro-b9-stage-1-suspension-package","title":"eMMOTION Audi A4 Quattro (B9) Stage 1 Suspension Package","description":"\u003cp\u003eIf you're looking to improve the looks and handling of your 2017+ Audi A4 Quattro, our stage 1 suspension package is for you! By purchasing as a package, you save money versus buying indidivudally. The stage 1 package features:\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.emmanueledesign.com\/collections\/audi\/products\/emmotion-2017-audi-a4-b9-lowering-spring-kit?variant=37478616330\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003c\/a\u003eeMMOTION Linear Lowering Springs\u003c\/strong\u003e: Our tried and tested lowering springs will close the wheel gap by 0.8 - 1.6\" (depending on factory suspension), while improving cornering. Featuring a linear rate (similar to OEM), ride quality is similar to stock.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eeMMOTION Rear Sway Bar\u003c\/strong\u003e: With our upgraded sway bar, you will experience reduced body roll and improved handling. As many customers note, \"The way it should have come from the factory.\"\u003c\/p\u003e","brand":"EMD Auto","offers":[{"title":"Default Title","offer_id":44310036086948,"sku":"eMMOTIONAudiA4Quattro(B9)Stage1SuspensionPackage","price":799.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0013\/9929\/1964\/products\/untitled-1_large_large_b403c917-fe49-452e-a5ad-dc509d951995.jpg?v=1680257775"},{"product_id":"emmotion-audi-a4-quattro-b9-2017-rear-sway-bar-upgrade","title":"eMMOTION Audi A4 Quattro B9 (2017+) Rear Sway Bar Upgrade","description":"\u003cp\u003eFor those looking for the next step in improved handling, we are pleased to release our rear sway bar upgrade for the Audi A4 Quattro (B9). As the world's first upgraded sway bar for the B9 platform, our sway bar has gone through months of development and testing on our in-house A4 Quattro. Intended to be paired with our lowering spring kit, the rear sway bar upgrade will dramatically reduce body roll to create a more neutral steering balance. This sway bar upgrade is specifically designed to function with the OEM front sway bar, getting rid of the factory under-steer while allowing enough compliance for a comfortable ride and predictable suspension behavior.\u003c\/p\u003e\r\n\u003cp\u003eReplaces part number 8W0511305AF.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eWhats Included:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSway Bar\u003c\/strong\u003e - The sway bar is a 22.2mm solid bar that is manufactured in the USA from high quality spring steel. We opted for a solid design, as it ensures that our sway bar will last a lifetime of abuse without risk of breakage or deformation. In order to maintain the factory suspension geometry (for those using stock end links), we opted for a non-adjustable design.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eBillet Brackets\u003c\/strong\u003e - Included with each sway bar is a set of our custom billet brackets. Through CAD design and stress analysis, we developed a stronger alternative to typical stamped brackets. Each bracket is CNC machined, anodized black and finished with a stealth \"e\".\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSteel Subplates\u003c\/strong\u003e - The factory sway bar bushings sit inside a void on the rear subframe. In order to properly utilize our provided bushings, we include a steel subplate which serves as a base for our bushings. By using our included subplate, the subframe can properly accept our included D-shaped bushing.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eBolts\u003c\/strong\u003e - Our included alloy steel bolts offer increased strength over their factory counter parts, and are slightly longer to accommodate our bracket and subplates. They utilize a flange head to evenly disperse load without the need for a washer, similar to the factory bolt.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eUpgraded Bushings\u003c\/strong\u003e - The included bushings are designed to minimize noise typically associated with polyurethane bushings. Using a unique interior groove, the bushing is able to better hold and maintain lubricating grease. This ensures continued usage without developing squeaks and creaks.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eSpecs:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eOEM 18.5mm Sway Bar Rate: 100 lb.\/in.\u003c\/p\u003e\r\n\u003cp\u003eeMMOTION Sway Bar Rate: 295 lb.\/in.\u003c\/p\u003e","brand":"EMD Auto","offers":[{"title":"Default Title","offer_id":44310036873380,"sku":"eMMOTIONAudiA4QuattroB9(2017+)RearSwayBarUpgrade","price":399.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0013\/9929\/1964\/products\/30794539801_539f4b27df_k_large_b2cc4503-dfb5-4a2c-b972-ac550eacc1b8.jpg?v=1680257784"},{"product_id":"emmotion-audi-s4-s5-b9-2018-rear-sway-bar-upgrade","title":"eMMOTION Audi S4 - S5 B9 (2018+) Rear Sway Bar Upgrade","description":"\u003cp\u003eFor those looking for the next step in improved handling, we are pleased to release our rear sway bar upgrade for the Audi S4 \/ S5 (B9). Intended to be paired with our lowering spring kit, the rear sway bar upgrade will dramatically reduce body roll to create a more neutral steering balance. This sway bar upgrade is specifically designed to function with the OEM front sway bar, getting rid of the factory under-steer while allowing enough compliance for a comfortable ride and predictable suspension behavior.Want to read what goes into the development of our rear sway bar?\u003c\/p\u003e\r\n\u003cp\u003eReplaces part number 8W0511305AJ.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eWhats Included:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSway Bar\u003c\/strong\u003e - The sway bar is a 22.2mm solid bar that is manufactured in the USA from high quality spring steel. We opted for a solid design, as it ensures that our sway bar will last a lifetime of abuse without risk of breakage or deformation. In order to maintain the factory suspension geometry (for those using stock end links), we opted for a non-adjustable design.\u003cstrong\u003eBillet Brackets\u003c\/strong\u003e - Included with each sway bar is a set of our custom billet brackets. Through CAD design and stress analysis, we developed a stronger alternative to typical stamped brackets. Each bracket is CNC machined, anodized black and finished with a stealth \"e\".\u003cstrong\u003eSteel Subplates\u003c\/strong\u003e - The factory sway bar bushings sit inside a void on the rear subframe. In order to properly utilize our provided bushings, we include a steel subplate which serves as a base for our bushings. By using our included subplate, the subframe can properly accept our included D-shaped bushing.\u003cstrong\u003eBolts\u003c\/strong\u003e - Our included alloy steel bolts offer increased strength over their factory counter parts, and are slightly longer to accommodate our bracket and subplates. They utilize a flange head to evenly disperse load without the need for a washer, similar to the factory bolt.\u003cstrong\u003eUpgraded Bushings\u003c\/strong\u003e - The included bushings are designed to minimize noise typically associated with polyurethane bushings. Using a unique interior groove, the bushing is able to better hold and maintain lubricating grease. This ensures continued usage without developing squeaks and creaks.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eSpecs:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eOEM 19.8mm Sway Bar Rate: 125 lb.\/in.eMMOTION Sway Bar Rate: 295 lb.\/in.\u003c\/p\u003e","brand":"EMD Auto","offers":[{"title":"Default Title","offer_id":44310036938916,"sku":"eMMOTIONAudiS4\/S5B9(2018+)RearSwayBarUpgrade","price":399.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0013\/9929\/1964\/products\/30794539801_539f4b27df_k_large_1.jpg?v=1680257792"}],"url":"https:\/\/www.amtuning.ca\/collections\/suspension.oembed?page=72","provider":"AM Tuning Canada","version":"1.0","type":"link"}